Added a 10" LED S2 Driving Bar to the 4xGuard center bumper section...very bright...pretty flush mount

Next I am going to build my own ends for the center section that will have braces that pass thru the plastic bumper cover for support.

_________________
Founder of L.O.S.T.
2006 CRD Sport
Mods: GDE Hot Tune w/ 364#@2000rpm/Air Box /3" Str8 Exhaust/ASFIR Alum Skids/245-75R-16 Cooper STT PRO/OME LIFT w/Clevis & 4 Spring Isos/AirTabs/Rigid 10" S2 LED/4xGuard Ctr Matrix Bumper
Drag Strip:Reac=.1078_60ft=2.224_1/8=10.39@64.8mph_1/4+16.46@80.8mph

Looks good! Like it belongs there.

Bob

Link? I wanna put one on my arb

_________________
2006 CRD - GTB2056 turbo by Dieselguy86, Eco Trans Tune, Lift Pump, Week's, HDS Tstat, Racor Filter, ARP's, OME 790's+Top Plate, JBA 2.5", JBA UCA, Moab's+265/75R16, ARB Bull Bar, 4.10's, TrueTracs

You can get LED light bars on Ebay etc. Cree and Chinese Cheap ones. There is a company in Texas called Plashlights that
has a good selection. I was specifically looking for the S2 Driving Pattern...so I paid the price for Rigids.

Just know that installing most LEDs lights will screw up your radio with interference...RF signals. None of them seem to be shielded enuff
cancel out white noise.

_________________
Founder of L.O.S.T.
2006 CRD Sport
Mods: GDE Hot Tune w/ 364#@2000rpm/Air Box /3" Str8 Exhaust/ASFIR Alum Skids/245-75R-16 Cooper STT PRO/OME LIFT w/Clevis & 4 Spring Isos/AirTabs/Rigid 10" S2 LED/4xGuard Ctr Matrix Bumper
Drag Strip:Reac=.1078_60ft=2.224_1/8=10.39@64.8mph_1/4+16.46@80.8mph

I have several of the cheap eBay ones. They are actually pretty good quality and come with a warranty.