It is currently Tue Sep 16, 2025 3:33 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 13 posts ] 
Author Message
 Post subject: Wheels and tires for my lifted KJ???
PostPosted: Thu Aug 27, 2015 3:04 am 
Offline
LOST Newbie

Joined: Thu Apr 16, 2009 5:34 pm
Posts: 59
Location: Washington State
Ok Ive got an 05 CRD that Im going to lift with a JBA 4" lift. Im going to put an ARB front bumper/winch/lights and some rocker skids on it. I want advice on the largest (within reason tires ((thinking BFG mud terrains)) that I can go with out having to re gear and rub. My main question is this; why do people always refer to "Moabs" when they talk about wheels? Do I need new wheels? Are the stock wheels NOT 8"ers?

Thanks in advance.


Tom

_________________
2005 CRD KJ
GDE engine/trans chips
Provent
Suncoast TC shift kit
40MPG


Top
 Profile  
 
 Post subject: Re: Wheels and tires for my lifted KJ???
PostPosted: Thu Aug 27, 2015 6:15 am 
Offline
LOST Member

Joined: Fri Apr 08, 2011 3:21 pm
Posts: 251
Location: Chillicothe, Ohio
.

_________________
________
06 Renegade, 265-70-16 Duratracs on Moab's/OMF, RL sliders ,roof rack, On board air, JBA-UCA, adjust-a strut, Rear-OME 948 two uppers ,Sensatrac shocks, Boiler rad. skid, Mopar/4x guard skid,Terra-flex 4:1,HD cooling,more lights, gauges. ARB/Warn, Mudds Rear Bumper.


Last edited by KJ/toy on Fri Aug 28, 2015 6:54 am, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: Wheels and tires for my lifted KJ???
PostPosted: Thu Aug 27, 2015 11:08 am 
Offline
LOST Addict
User avatar

Joined: Tue Jun 04, 2013 1:21 pm
Posts: 2137
Location: Utah
CRD_Joe wrote:
Ok Ive got an 05 CRD that Im going to lift with a JBA 4" lift. Im going to put an ARB front bumper/winch/lights and some rocker skids on it. I want advice on the largest (within reason tires ((thinking BFG mud terrains)) that I can go with out having to re gear and rub. My main question is this; why do people always refer to "Moabs" when they talk about wheels? Do I need new wheels? Are the stock wheels NOT 8"ers?

Thanks in advance.


Tom


Moabs are TJ Wrangler Rubicon factory wheels and its because they are wider and have some more back spacing so they have a deeper cup to the face and look great. Mine with the 265/70R16 Duratracs are perfectly lined up with the stock fenders.

Be aware that you will need the cut CV's for your 4" lift. I did OME plus 1/4" clevis and JBA top plate and I'm pretty sure my CV's are at the absolute limit. I hear them chirp once in a while.

_________________
2006 CRD - GTB2056 turbo by Dieselguy86, Eco Trans Tune, Lift Pump, Week's, HDS Tstat, Racor Filter, ARP's, OME 790's+Top Plate, JBA 2.5", JBA UCA, Moab's+265/75R16, ARB Bull Bar, 4.10's, TrueTracs


Top
 Profile  
 
 Post subject: Re: Wheels and tires for my lifted KJ???
PostPosted: Thu Aug 27, 2015 12:12 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
CRD_Joe wrote:
Ok Ive got an 05 CRD that Im going to lift with a JBA 4" lift. Im going to put an ARB front bumper/winch/lights and some rocker skids on it. I want advice on the largest (within reason tires ((thinking BFG mud terrains)) that I can go with out having to re gear and rub. My main question is this; why do people always refer to "Moabs" when they talk about wheels? Do I need new wheels? Are the stock wheels NOT 8"ers?

Thanks in advance.


Tom


hey Tom,
Stock wheels are 7 inches wide and work great with any tire size we can run on any KJ lifted or not
IF you think you want new wheels then stick with 7 inches wide and 4 inches of backspacing which sits the wheel out some
Moabs are 8 inches wide and although I run them wish all the time they would be 7 inches wide, would be perfect then
Many run the 265-70-16s on the MOABs since they are same height as the 245-75-16s but wider so sit on the MOABs way better

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: Wheels and tires for my lifted KJ???
PostPosted: Thu Aug 27, 2015 4:52 pm 
Offline
LOST Newbie

Joined: Thu Apr 16, 2009 5:34 pm
Posts: 59
Location: Washington State
Thanks everyone. If I decide to go that route, where can I buy some Moabs?


Tom

_________________
2005 CRD KJ
GDE engine/trans chips
Provent
Suncoast TC shift kit
40MPG


Top
 Profile  
 
 Post subject: Re: Wheels and tires for my lifted KJ???
PostPosted: Thu Aug 27, 2015 8:27 pm 
Offline
LOST Member

Joined: Tue Nov 13, 2012 5:04 am
Posts: 326
Location: Anchorage, AK
31 or 32's on 15" wheels...

Way better pricing and a much larger sidewall!

_________________
OME 2.75" lift. JBA UCA's.
Flowmaster super 44.
BoulderBars. Home built stubby.

31X10.5 Duratracs
Yukon / Motive Gear 4.10's

Aussie Locker. Safari Snorkel.
ARB Diff Guard
Soft 8 - X7 - 4" BS


Top
 Profile  
 
 Post subject: Re: Wheels and tires for my lifted KJ???
PostPosted: Thu Aug 27, 2015 11:11 pm 
Offline
LOST Addict
User avatar

Joined: Tue Jun 04, 2013 1:21 pm
Posts: 2137
Location: Utah
CRD_Joe wrote:
Thanks everyone. If I decide to go that route, where can I buy some Moabs?


Tom


I bought 4 of them off craigslist and then a 5th one off ebay. They shouldnt be too hard to find. I had them refinished and spent too much $ doing that but they came out good.

_________________
2006 CRD - GTB2056 turbo by Dieselguy86, Eco Trans Tune, Lift Pump, Week's, HDS Tstat, Racor Filter, ARP's, OME 790's+Top Plate, JBA 2.5", JBA UCA, Moab's+265/75R16, ARB Bull Bar, 4.10's, TrueTracs


Top
 Profile  
 
 Post subject: Re: Wheels and tires for my lifted KJ???
PostPosted: Fri Aug 28, 2015 2:35 am 
Offline
LOST Newbie

Joined: Thu Apr 16, 2009 5:34 pm
Posts: 59
Location: Washington State
They probably dont make 15" Moabs. If I get new 15" wheels what do I want as far as offset and backspacing? Tom mentioned 4" of backspacing. What about offset?

I wouldnt mind some Mickey Thompson wheels on 31x10.50x15's.

_________________
2005 CRD KJ
GDE engine/trans chips
Provent
Suncoast TC shift kit
40MPG


Top
 Profile  
 
 Post subject: Re: Wheels and tires for my lifted KJ???
PostPosted: Fri Aug 28, 2015 9:13 am 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
CRD_Joe wrote:
They probably dont make 15" Moabs. If I get new 15" wheels what do I want as far as offset and backspacing? Tom mentioned 4" of backspacing. What about offset?

I wouldnt mind some Mickey Thompson wheels on 31x10.50x15's.



Moabs are only in 16 inch, no 15s
off set and backspacing are one or the other, Just look for 4 inches of backspacing and 7 inches wide,
or 5 inches of backspacing and 8 inches wide if you think you need that wide for some reason

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: Wheels and tires for my lifted KJ???
PostPosted: Fri Aug 28, 2015 4:46 pm 
Offline
LOST Newbie

Joined: Thu Apr 16, 2009 5:34 pm
Posts: 59
Location: Washington State
The wheels Im thinking of are Mickey Thompson Classic 3's. Here are the stats:

Bolt Pattern
5x4.5
Backside
3 5/16
Max Load
2000
Weight
17

What does Backside mean? Back spacing?????

_________________
2005 CRD KJ
GDE engine/trans chips
Provent
Suncoast TC shift kit
40MPG


Top
 Profile  
 
 Post subject: Re: Wheels and tires for my lifted KJ???
PostPosted: Fri Aug 28, 2015 5:22 pm 
Offline
LOST Member
User avatar

Joined: Fri Sep 23, 2011 1:03 am
Posts: 100
tommudd wrote:

hey Tom,
Stock wheels are 7 inches wide and work great with any tire size we can run on any KJ lifted or not
IF you think you want new wheels then stick with 7 inches wide and 4 inches of backspacing which sits the wheel out some
Moabs are 8 inches wide and although I run them wish all the time they would be 7 inches wide, would be perfect then
Many run the 265-70-16s on the MOABs since they are same height as the 245-75-16s but wider so sit on the MOABs way better


Ironically 245/75 was the stock tire size on TJ Rubicons....but I agree with Tom. My 245/75 Duratracs on Moabs just look kinda funny. Gonna have to look into 265/70s next time I need tires.

_________________
02 LIberty Renegade
OME/Bilstein
JBA Gen4.5
IRO 3 Linked
245/75 Duratracs


Top
 Profile  
 
 Post subject: Re: Wheels and tires for my lifted KJ???
PostPosted: Fri Aug 28, 2015 9:32 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
CRD_Joe wrote:
The wheels Im thinking of are Mickey Thompson Classic 3's. Here are the stats:

Bolt Pattern
5x4.5
Backside
3 5/16
Max Load
2000
Weight
17

What does Backside mean? Back spacing?????



How wide ?? If 8 inches they are going to stick out past the flares a good bit and also create issues with rubbing
If 7 inches wide , well they would work but...

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: Wheels and tires for my lifted KJ???
PostPosted: Fri Aug 28, 2015 9:33 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
gottorque wrote:
tommudd wrote:

hey Tom,
Stock wheels are 7 inches wide and work great with any tire size we can run on any KJ lifted or not
IF you think you want new wheels then stick with 7 inches wide and 4 inches of backspacing which sits the wheel out some
Moabs are 8 inches wide and although I run them wish all the time they would be 7 inches wide, would be perfect then
Many run the 265-70-16s on the MOABs since they are same height as the 245-75-16s but wider so sit on the MOABs way better


Ironically 245/75 was the stock tire size on TJ Rubicons....but I agree with Tom. My 245/75 Duratracs on Moabs just look kinda funny. Gonna have to look into 265/70s next time I need tires.


Jeep wanted to advertise that they had 8 inch wide wheels and 31 inch tires at the time the Goodyear MTRs in 245-75-16 size is what they could get

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 13 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 16 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com