It is currently Mon Sep 15, 2025 4:20 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: LBJ Part Number Confusion
PostPosted: Fri Oct 30, 2015 8:05 am 
Offline
LOST Newbie

Joined: Mon Aug 11, 2014 12:33 pm
Posts: 17
So on this site I read that the LBJ Moog part # is K3199 but according to Amazon, this part does not fit my 2007 Liberty. The part they list is Moog K80767 Ball Joint (which is also greasable). Why is this different and if the K80767 is greasable than what's the difference?

_________________
07 4x4 Sport/42RLE/2.5" Daystar lift/245/75/16 BFG KO2s on 16x8.5 Chaos 5 wheels. Did not have to hammer pinch welds....yet


Top
 Profile  
 
 Post subject: Re: LBJ Part Number Confusion
PostPosted: Fri Oct 30, 2015 8:21 am 
Offline
LOST Addict

Joined: Fri Jun 22, 2007 11:43 am
Posts: 4962
Location: Green Cove Springs FL
You want the K80767
http://www.fme-cat.com/overlays/part-detail.aspx?brand=MC&PartNumber=K80767&pt=Ball%20Joint&lu=2007%20JEEP%20LIBERTY&vin=

_________________
U.S. Army Retired


Top
 Profile  
 
 Post subject: Re: LBJ Part Number Confusion
PostPosted: Fri Oct 30, 2015 9:24 am 
Offline
LOST Newbie

Joined: Wed Jul 18, 2012 10:54 am
Posts: 17
Location: MB, CAN
K3199 fit the 2007 as those are the ones I and other 2007 have installed.

If you look up part numbers for the knuckle or LCA they are the same for 02 -07 which is what the lbj presses into.

Have not tried the other listed part number as i assumed it was a mistake across all the parts catalogs.

There are no clearance issues with using the 3199's.

_________________
07 KJ Sport
OME 927-948 / Bilstein 916-702 / 0.25" JBA Plates / Rear Iso / JBA 4.5 UCA / Mamba MR-1 / 245 75 16 Duratracs / Mopar Skids / Curt Hitch


Top
 Profile  
 
 Post subject: Re: LBJ Part Number Confusion
PostPosted: Fri Oct 30, 2015 10:13 am 
Offline
LOST Addict

Joined: Thu Jul 16, 2009 11:34 am
Posts: 1236
I use the K80767 on ALL KJs that roll into my shop and on my personal KJs. They have a guaranteed grease fitting thats angled off to the side. Works 100% of the time. I got tired fighting trying to find the k3199 with grease zerts. My luck has been 50/50 with the K3199. The K80767 has been 100%

Sent from my SM-N900P using Tapatalk

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.


Top
 Profile  
 
 Post subject: Re: LBJ Part Number Confusion
PostPosted: Fri Oct 30, 2015 10:20 am 
Offline
LOST Addict

Joined: Thu Jul 16, 2009 11:34 am
Posts: 1236
K3199......50% of the time I get this POS when looking for the LBJ
Image

100% of the time. Every time. Fits all years KJs.
Image

From what I was told from MOOG, the K80787 has a bigger internal all metal design, they said thats their "update" to the Mopar recall. But holding the two in my hands, you can feel the weight difference.

Sent from my SM-N900P using Tapatalk

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 19 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com