LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

4xGuard skids and ARB bumper
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=83361		 Page 1 of 1
Author:  mass-hole [ Thu Oct 29, 2015 1:33 pm ]
Post subject:  4xGuard skids and ARB bumper
I have the ARB installed and am looking into a set of 4xguard skids. It looks as if the 4x Front Guard(seen here: http://jeepinbyal.com/liberty-2002-2007-kj/4xguard-armor/kj-front-guard.html) may install in the same location as the plate that comes with the bumper. Is this true? If so will the Front Guard skid plate(seen here: http://jeepinbyal.com/liberty-2002-2007-kj/4xguard-armor/kj-front-guard-skid-plate.html) work with the ARB plate that comes with the bumper?
Author:  tommudd [ Thu Oct 29, 2015 4:34 pm ]
Post subject:  Re: 4xGuard skids and ARB bumper
mass-hole wrote:
I have the ARB installed and am looking into a set of 4xguard skids. It looks as if the 4x Front Guard(seen here: http://jeepinbyal.com/liberty-2002-2007-kj/4xguard-armor/kj-front-guard.html) may install in the same location as the plate that comes with the bumper. Is this true? If so will the Front Guard skid plate(seen here: http://jeepinbyal.com/liberty-2002-2007-kj/4xguard-armor/kj-front-guard-skid-plate.html) work with the ARB plate that comes with the bumper?



It will work with the ARB bumper
I never used that plate that came with the ARB , but I'd say remove it and bolt the 4XGuard one in place.
I have used it with the ARB, The matrix Brush guard and the RL with no issues ( and thats with it bolted to a Skid Row front engine skid )
Author:  mass-hole [ Thu Oct 29, 2015 4:37 pm ]
Post subject:  Re: 4xGuard skids and ARB bumper
tommudd wrote:
mass-hole wrote:
I have the ARB installed and am looking into a set of 4xguard skids. It looks as if the 4x Front Guard(seen here: http://jeepinbyal.com/liberty-2002-2007-kj/4xguard-armor/kj-front-guard.html) may install in the same location as the plate that comes with the bumper. Is this true? If so will the Front Guard skid plate(seen here: http://jeepinbyal.com/liberty-2002-2007-kj/4xguard-armor/kj-front-guard-skid-plate.html) work with the ARB plate that comes with the bumper?



It will work with the ARB bumper
I never used that plate that came with the ARB , but I'd say remove it and bolt the 4XGuard one in place.
I have used it with the ARB, The matrix Brush guard and the RL with no issues ( and thats with it bolted to a Skid Row front engine skid )


Where does that upper loop from the front guard bolt too, the body colored cross beam with the 4 self taping bolts?
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/