| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| LBJ Part Number Confusion http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=83370 |
Page 1 of 1 |
| Author: | Mike1970 [ Fri Oct 30, 2015 8:05 am ] |
| Post subject: | LBJ Part Number Confusion |
So on this site I read that the LBJ Moog part # is K3199 but according to Amazon, this part does not fit my 2007 Liberty. The part they list is Moog K80767 Ball Joint (which is also greasable). Why is this different and if the K80767 is greasable than what's the difference? |
|
| Author: | flash7210 [ Fri Oct 30, 2015 8:21 am ] |
| Post subject: | Re: LBJ Part Number Confusion |
You want the K80767 http://www.fme-cat.com/overlays/part-detail.aspx?brand=MC&PartNumber=K80767&pt=Ball%20Joint&lu=2007%20JEEP%20LIBERTY&vin= |
|
| Author: | Cardhu [ Fri Oct 30, 2015 9:24 am ] |
| Post subject: | Re: LBJ Part Number Confusion |
K3199 fit the 2007 as those are the ones I and other 2007 have installed. If you look up part numbers for the knuckle or LCA they are the same for 02 -07 which is what the lbj presses into. Have not tried the other listed part number as i assumed it was a mistake across all the parts catalogs. There are no clearance issues with using the 3199's. |
|
| Author: | JeepMorrison [ Fri Oct 30, 2015 10:13 am ] |
| Post subject: | Re: LBJ Part Number Confusion |
I use the K80767 on ALL KJs that roll into my shop and on my personal KJs. They have a guaranteed grease fitting thats angled off to the side. Works 100% of the time. I got tired fighting trying to find the k3199 with grease zerts. My luck has been 50/50 with the K3199. The K80767 has been 100% Sent from my SM-N900P using Tapatalk |
|
| Author: | JeepMorrison [ Fri Oct 30, 2015 10:20 am ] |
| Post subject: | Re: LBJ Part Number Confusion |
K3199......50% of the time I get this POS when looking for the LBJ  100% of the time. Every time. Fits all years KJs.  From what I was told from MOOG, the K80787 has a bigger internal all metal design, they said thats their "update" to the Mopar recall. But holding the two in my hands, you can feel the weight difference. Sent from my SM-N900P using Tapatalk |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|