I've gotten the rear springs and all shocks and struts, on a 1.5 inch lift do I reuse the stock strut springs or am I missing them? Thanks!

sounds like they are missing

_________________
02 KJ Limited, 255 70 16 General AT2, Ironman Lift, JCR sliders, Mopar skids, radiator skid, LS/373 gearing, factory front hooks and rear hitch

92 XJ 4.0, AW4, NP242, 31s, 1.75 spacer, ZJ V8 coils, double cherokee leaf pack, 2 inch shackles, dnynomax exhaust, magnaflow cat, front hooks & rear hitch, gas tank skid, front skid, warn t-case skid

So you have 4 springs and 4 shocks correct all OME?
Not sure of the question, in front you reuse the isolaters ( upper and lower ) is that what you mean?

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

If you can take a picture of what you have, I think that would help us clear up what might be missing.

_________________
2008 Liberty Sport 4x4 Automatic

Jeepin By Al 4" Lift Kit
BFG KO2’s 245/75R16
Full MOPAR skid plates
Rock Lizard Skink Super Sliders
AtTheHelm Front Recovery System & Roof Rack
M116A3 Trailer build thread: viewtopic.php?f=72&t=77997