LOST JEEPS :: View topic - Ox Locker for the front diff?

The forward most mount needs a slight mod, but thats super easy with a grinder.

:D thx for the good news :!:

Quote:

The forward most mount needs a slight mod, but thats super easy with a grinder.

Do you have some pics for easier understanding? :oops:

bye,
samse

thx for the pics... :wink:

but the air system is much too big -> any ideas to get a smaller one, who fits under the passenger front seat? :?:

How much pressure i really nees for both lockers? And how big should be the tank? :oops:

bye,
samse

how did you install the air lines to the axles? Do you have some pics of it? an where did you go through the chassis?

i could imagine at the same hole, like the parking brake wire?
Sry for the much questions, but i want to inform myself for the best installation (clean, professional and hidden)

bye,
samse

Author:	samse2101 [ Thu Dec 24, 2015 12:04 pm ]
Post subject:	Ox Locker for the front diff?
Anyone done this until now? Or does the D30 OX-Locker Kit doesn´t fit the D30a? Any other suggestions for a manual front locker bye, samse

Author:	JeepMorrison [ Thu Dec 24, 2015 1:33 pm ]
Post subject:	Re: Ox Locker for the front diff?
I have the OX. And yes it does fit bith the JBA d30 and the D30a. The forward most mount needs a slight mod, but thats super easy with a grinder. Other than OX theres ARB. Thats it. Me personally I love OX. No seals to blow, has serveral ways to lock it, and has a emergency lock just in case your electric, air or cable gets messed up. Either way, go with Air/co2. Sent from my SM-N900P using Tapatalk

Author:	samse2101 [ Thu Dec 24, 2015 1:56 pm ]
Post subject:	Re: Ox Locker for the front diff?
thx for the good news Quote: The forward most mount needs a slight mod, but thats super easy with a grinder. Do you have some pics for easier understanding? bye, samse

Author:	JeepMorrison [ Thu Dec 24, 2015 5:31 pm ]
Post subject:	Re: Ox Locker for the front diff?
samse2101 wrote: :D thx for the good news Quote: The forward most mount needs a slight mod, but thats super easy with a grinder. Do you have some pics for easier understanding? bye, samse The stock mount is straight across. For the OX it needs to be cleared for the bigger cover. Takes 5mins. Sent from my SM-N900P using Tapatalk

Author:	NAMoulton1 [ Fri Dec 25, 2015 12:02 am ]
Post subject:	Re: Ox Locker for the front diff?
OX lock it. Spend the money if you wheel it and do it right!

LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/

Ox Locker for the front diff? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=83716	Page 1 of 1

Author:	samse2101 [ Fri Dec 25, 2015 3:08 am ]
Post subject:	Re: Ox Locker for the front diff?
Check! Which mechanism do u use? i want to use the manual shift, anyone idea´s how long should be the cable for front/rear? btw: i see u have installed the JBA Diff, but i isn´t necessary to fit the front locker? bye, samse

Author:	JeepMorrison [ Fri Dec 25, 2015 9:30 am ]
Post subject:	Re: Ox Locker for the front diff?
I have air and perfer the air. The JBA diff is required for 4.56s Sent from my SM-N900P using Tapatalk

Author:	PALiftedKK [ Fri Dec 25, 2015 1:32 pm ]
Post subject:	Re: Ox Locker for the front diff?
If your thinking of lockers, OX should be the only locker that should come to mind. Expensive, but its the last locker you'll buy.

Author:	samse2101 [ Fri Dec 25, 2015 2:03 pm ]
Post subject:	Re: Ox Locker for the front diff?
Ok, you prefer the air shift -> do you have some more pics from your installation? Where did you gave the compressor? do u use an air tank? @ all: don´t worry, there´s only one locker for me -> THE OX... i had both lockers (OX and ARB) side-by-side to compare, and the ox locker looks definitley more massiv with stronger teeths... bye, samse

Author:	JeepMorrison [ Fri Dec 25, 2015 3:05 pm ]
Post subject:	Re: Ox Locker for the front diff?
I have a viair OBA with the 480c. Heres my air switches Sent from my SM-N900P using Tapatalk

Author:	samse2101 [ Fri Dec 25, 2015 3:28 pm ]
Post subject:	Re: Ox Locker for the front diff?
thx for the pics... but the air system is much too big -> any ideas to get a smaller one, who fits under the passenger front seat? How much pressure i really nees for both lockers? And how big should be the tank? bye, samse

Author:	JeepMorrison [ Fri Dec 25, 2015 3:59 pm ]
Post subject:	Re: Ox Locker for the front diff?
Get ya a 20oz co2 tank with the OX regulator. You dont need alot of air for the OX. I just have it for air tools and filling up tires Sent from my SM-N900P using Tapatalk

Author:	PALiftedKK [ Fri Dec 25, 2015 4:00 pm ]
Post subject:	Re: Ox Locker for the front diff?
samse2101 wrote: thx for the pics... but the air system is much too big -> any ideas to get a smaller one, who fits under the passenger front seat? How much pressure i really nees for both lockers? And how big should be the tank? bye, samse Arb make small compressors. You can install them almost anywhere on a jeep. Or buy a cheep compressor and a 2 galon tank. The mod would be less then 50 bucks. The compressor would only be a half duty. Half duty would only be good for short loads. ^^^ good luck finding a cheep compressor that can go to 90 psi without blowing it apart.

Author:	PALiftedKK [ Fri Dec 25, 2015 4:01 pm ]
Post subject:	Re: Ox Locker for the front diff?
Or just spend 20 bucks for a co2 tank like morison.

Author:	NAMoulton1 [ Wed Feb 24, 2016 10:15 am ]
Post subject:	Re: Ox Locker for the front diff?
Tips on install is simply take it somewhere to be installed...you need another $750 in weird expensive toolso that you'll never use again.

Page 1 of 1	All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/

Author:	samse2101 [ Sat Dec 26, 2015 2:15 am ]
Post subject:	Re: Ox Locker for the front diff?
how did you install the air lines to the axles? Do you have some pics of it? an where did you go through the chassis? i could imagine at the same hole, like the parking brake wire? Sry for the much questions, but i want to inform myself for the best installation (clean, professional and hidden) bye, samse

Author:	JeepMorrison [ Sat Dec 26, 2015 12:22 pm ]
Post subject:	Re: Ox Locker for the front diff?
samse2101 wrote: how did you install the air lines to the axles? Do you have some pics of it? an where did you go through the chassis? i could imagine at the same hole, like the parking brake wire? Sry for the much questions, but i want to inform myself for the best installation (clean, professional and hidden) bye, samse The air lines just snap onto the cover. My air lines are ran thru the firewall, then down the frame rail. Its a real clean install. Sent from my SM-N900P using Tapatalk

Author:	NAMoulton1 [ Tue Dec 29, 2015 1:57 am ]
Post subject:	Re: Ox Locker for the front diff?
I mounted some hose clamps onto the back of my passenger seat and have a 12oz paintball CO2 that gets secured there. Allows for up to 1200 shifts...so a very long time haha. No need to have an expensive compressor and tank taking up room in the Jeep. Less wires too haha.

Author:	samse2101 [ Sun Feb 21, 2016 9:47 am ]
Post subject:	Re: Ox Locker for the front diff?
the lockers are oin their way home to me -> now i´m looking for some advice and tips for the installation: viewtopic.php?f=3&t=84075 bye, samse

Author:	samse2101 [ Fri Feb 26, 2016 7:44 am ]
Post subject:	Re: Ox Locker for the front diff?
Sorry, not an option -> i don´t trust any garage in my area...