So i've finally gotten the standard leak in the top driver's side plastic tank on the radiator. everyone says MOPAR, MOPAR, MOPAR and i will go that way. unless anyone thinks that one of these will work. i started thinking about summit (used to live around the corner) and they have hundreds of different universal fit radiators. being that i have an '06 there is an external transmission cooler, so literally all we have are radiators correct? i found these two options
http://www.summitracing.com/parts/hre-342d/overview/
and
http://www.summitracing.com/parts/sum-380324/overview/
that while are not exactly the same size as OEM, should fit. the second once is about 1.75 inches wider, which could be dealt with in the mounts i believe, the radiator currently is a few inches inside of the mounts. the first one should fit overall except it is 3 inches deep which is a decent amount thicker than factory.

Reasons i'm asking? 1) i have a coupon for 20 off 100 for summit, 2) i have a summit speed credit card and speed points to use and 3) why keep putting in a mopar one when they will eventually break again? i figured go all aluminum and hopefully keep that from happening again. post your thoughts/concerns please....need to order soon :/

_________________
06 KJ sport 926/948s Mopar/Boiler Skids, trimmed front bumper with detours backbone, (in possession of or soon: custom RL Super skink sliders (tommudd) and JBA upper Arms)

No one has done it yet doing it the "summit way". I know of one guy that had one custom made up

But the Mopar radiators has lasted justas long as the ones from autozone. So Im tagging along.

_________________
I am the G.O.A.T.

_________________
U.S. Army Retired

That sure is nice.....price is good I think....

_________________
________
06 Renegade, 265-70-16 Duratracs on Moab's/OMF, RL sliders ,roof rack, On board air, JBA-UCA, adjust-a strut, Rear-OME 948 two uppers ,Sensatrac shocks, Boiler rad. skid, Mopar/4x guard skid,Terra-flex 4:1,HD cooling,more lights, gauges. ARB/Warn, Mudds Rear Bumper.

Dang it! That's awesome. I replaced mine a few years back with a Mopar and it's been good but cost about the same as that. Tried a Spectra Premium that wasn't so premium when the 12 year old factory rad went. Spectra lasted a few months. Then went with the Mopar.

_________________
02 Limited 179K (GONE)
05 Limited 71K (DD)
Lots to do... too little time.

Same impression here for this pretty solid rad.

_________________
2007 Jeep Wrangler JK 2dr 4x4 Rubicon

I didnt see this......wonder whos gonna be a test subject

_________________
I am the G.O.A.T.

Dont think im going to be... Seem to have pretty good reviews and it cuts out having to figure out how to mount it, just not sure about it...


Sent from my iPhone using Tapatalk

_________________
06 KJ sport 926/948s Mopar/Boiler Skids, trimmed front bumper with detours backbone, (in possession of or soon: custom RL Super skink sliders (tommudd) and JBA upper Arms)

Here is what I'm wondering, good price with free shipping
BUT
Shipping: FREE Standard Shipping from outside US | See details
International items may be subject to customs processing and additional charges.

Item location:
Zibo Shandong, China


So wonder how much customs are going to want
I once shipped some used books and a pair of used shoes to my wife , items were worth 75-80 bucks, cost over 175 shipping then she had to pay over 120 US dollars for customs
She really missed those shoes !

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Its looking (rough estimate with online calculators) to be between 330-350. I can get a summit radiator, thermostat/housing and new radiator hoses for under 300 shipped, not including my gift cards etc... May go the summit route, especially because of customer service (returns etc). Any comments on the actual specs of the radiators i posted?


Sent from my iPhone using Tapatalk

_________________
06 KJ sport 926/948s Mopar/Boiler Skids, trimmed front bumper with detours backbone, (in possession of or soon: custom RL Super skink sliders (tommudd) and JBA upper Arms)