lipz wrote:
tommudd wrote:
Hi Tom, I installed the OME 927's and got 1.5" only. The JBA 1/4" top plate brought me to 2". What could be wrong with my setup?
WAY too much lift if not getting JBA UCAs, plus only use a 3/8 inch clevis NOT 1/2 inch on OME springs
With OME 927s in front and 1/2 inch clevis , that alone is 3.5 inches , then another 1/2 inch from the 1/4 inch top plate would be 4 inches
Even with the JBA UCAs going to have a lot of UCA/spring contact at that height
So a 2.75" lift in the front is
WAY too much lift without the use of custom UCA's ??
No thats not what I posted , what White posted would be too much lift, since he had stated that you could use a 1/2 inch clevis and a 1/4 inch top plate.
IF you did that you would have 4 inches of lift not 2.75 as he posted. OME 927 would give you 2.5 inches of lift over new stock height, add one inch from the 1/2 inch clevis so now you have 3.5 inches, next adding his 1/4 inch top plate for another 1/2 inch lift so he would have 4 inches of lift/
When you get to 3 inches you really need to start looking at the JBA UCA's , you can get by beow that although they are a great upgrade