has anyone had the light for the automatic transmission shifter burn out? has anyone tried to replace it? I tried but cannot find the correct size bulb. I've taken the old one to several auto parts stores and Bulbs+batteries, no luck. It is a wedge type base that is .030" smaller than the standard bases you can get in the stores, i.e 37, 73, 74....

2007 Jeep Liberty, 2nd generation I believe

GAKJ

I have an 05 Liberty. The Mopar part number is MS820083. Normally at the dealer it should only be a couple of bucks for the bulb if they have it. Otherwise to order it online it can be 10-12 bucks with s&h.

When it arrives put it in a safe place otherwise it might get thrown out, like my wife did. Apparently it looked just like an empty envelope to her.

_________________
2005 KJ 3.7, 2.5 OME Lift, JBA UCAs

Thanks, I'll check that out. But since we have such a bad Jeep dealer in our area, I also did some research and believe it is an E74, (or E73 or E37) European wedge sub-miniature base bulb. I'm going to see if I can order an E37 online. AutoZone and Bulbs+Batteries did not stock it. In fact, AutoZone doesn't even have 'E' bulbs in their database.

If it's the same as the one in my 08 KK, this might help:
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=71724

_________________
2008 Liberty Sport 4x4 Automatic

Jeepin By Al 4" Lift Kit
BFG KO2’s 245/75R16
Full MOPAR skid plates
Rock Lizard Skink Super Sliders
AtTheHelm Front Recovery System & Roof Rack
M116A3 Trailer build thread: viewtopic.php?f=72&t=77997

Thanks. I found an E37 bulb online and ordered one. Just 48 cents plus $3.20 shipping. I will post if it works

The E37 bulb is an exact fit and brightness:) Total cost was $3.68 and it arrived by USPS First-Class Mail in a couple days. I ordered it from Bulbtown.com and it shipped from Jacksonville, FL

agreed on the e37 bulb. got mine on ebay for a few cents. i think it was like .79 with free shipping. don't know how they made money....

_________________
06 KJ sport 926/948s Mopar/Boiler Skids, trimmed front bumper with detours backbone, (in possession of or soon: custom RL Super skink sliders (tommudd) and JBA upper Arms)

my first post on forum goes here.

what we need for shifter bulb is T4.6 (4.6 mm) type 1.2 or 2 watt bulb. i bought LED replacements, which is T5 with 3020 led chips. it works but i did not like the blue color and put the incandescent bulb back for now.

Did you find the lamp on the Internet in any store or on a certain website?

I heard you can find almost all kinds of lamps on amazon and not only them.

Did you find the lamp on the Internet in any store or on a certain website? I heard you can find almost all kinds of lamps on amazon and not only them.

If you have an authorized dealer an E74, (or E73 or E37) European wedge sub-miniature base bulb could not be installed in your car. Check if similar bulbs are available. The E37 bulb can be ordered from the same place I bought the bulbs for the house, the seller amazon led light bulbs offers, ask him. The total cost was $7.23 for my bulbs, but I ordered for the whole house and some extra for the car. They were enough for more than all the street lights and the whole house. So I think you will save money even if you just buy them in small quantities.