LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
Ball joints for older JBA control arms http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=86731 |
Page 1 of 1 |
Author: | user113 [ Fri Jun 16, 2017 3:20 pm ] |
Post subject: | Ball joints for older JBA control arms |
Hi, all, I was wondering if anybody knows what replacement ball joints I should use on my older JBA A-arms. 2005 KJ w/ CRD. I got the 2.5 inch lift with the Adjust-A-Strut. I think this was the "gold" lift back then. This was probably around the summer of 2010. The JBA website shows the K6292 ball joint, and lists AC/Delco #45D0062 and Raybestos #500-1062 for the Gen 4.5 KJ arms, but I know mine predate Gen 4.5. I called JBA, but got the message that they were out on the trail, "testing parts." More power to them, I hope they're having a great time. But, meanwhile, I would like to get my ball joints replaced today or tomorrow if I can find the right part number and if the part store has them in stock. My car has a big "rejected" sticker on it right now for failing the ball joint component of the annual safety inspection and I have to drive it to work on Monday. |
Author: | tommudd [ Fri Jun 16, 2017 7:27 pm ] |
Post subject: | Re: Ball joints for older JBA control arms |
user113 wrote: Hi, all, I was wondering if anybody knows what replacement ball joints I should use on my older JBA A-arms. 2005 KJ w/ CRD. I got the 2.5 inch lift with the Adjust-A-Strut. I think this was the "gold" lift back then. This was probably around the summer of 2010. The JBA website shows the K6292 ball joint, and lists AC/Delco #45D0062 and Raybestos #500-1062 for the Gen 4.5 KJ arms, but I know mine predate Gen 4.5. I called JBA, but got the message that they were out on the trail, "testing parts." More power to them, I hope they're having a great time. But, meanwhile, I would like to get my ball joints replaced today or tomorrow if I can find the right part number and if the part store has them in stock. My car has a big "rejected" sticker on it right now for failing the ball joint component of the annual safety inspection and I have to drive it to work on Monday. Either one should work or just order on line with JBA, they will be back in the shop Monday morning early |
Author: | user113 [ Tue Jun 27, 2017 10:50 pm ] |
Post subject: | Re: Ball joints for older JBA control arms |
For those of you with older A arms, I was able to verify with JBA that all the older A arms with ball joints that bolt on with four bolts can use the K6292 ball joints. If the A arm has pressed in ball joints, you'll have to use something else. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |