I have 265 65 17's
2.5" Econo lift from JBA.
1.5" spidertrax (wider makes a HUGE difference).
They rubbed the pinch a little (hammered that down, and melted the plastic smooth with a heat gun). They still rub the plastic there but not bad.
After about 5k miles, they have rubbed notches in the front of the fender wells where the inside corner of the tire hits during medium angle turning. I tried to heat and form these out a little to minimize this, but in the end I will be cutting them up when I do my bumper this fall (hopefully).
https://drive.google.com/file/d/1SPJk-IsRNRyoo5yUPxpbAFF-iQRfpiFWyg/view?usp=sharinghttps://drive.google.com/file/d/1D-zU9RXhbq5KpzFf6qxizHfryTIcjg2dBg/view?usp=sharinghttps://drive.google.com/file/d/1Mu5fuSplKx6d86TeWjIvElL1RA6nWngjcQ/view?usp=sharing