It is currently Thu Mar 28, 2024 3:41 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: transfercase swap
PostPosted: Mon Jul 17, 2017 4:45 pm 
Offline
LOST Newbie

Joined: Mon Jul 17, 2017 4:25 pm
Posts: 2
Hello everybody

I have a question. I wanne convert my 2002 jeep liberty.

Ihave dana 44 axles with arb's and 4.56R&P. Only problem is the front axle is a passenger side drop. So i am looking to install a transfercase that has a passenger side output. Is it possible to install a dana 300 to my 45RFE transmission?

Kind regards
Mike


Top
 Profile  
 
 Post subject: Re: transfercase swap
PostPosted: Tue Aug 29, 2017 12:34 pm 
Offline
LOST Newbie

Joined: Fri Aug 07, 2015 10:56 pm
Posts: 14
Location: Pacific WA
Try reaching out to Novak or Advance Adapters. I did not see your transamission listed but it should have the 6 bolt circular pattern for a New Process transfer case and normally to run the dana 300 that has a 6 bolt pattern also, you need a clocking ring.

See this for example.
https://www.novak-adapt.com/catalog/ada ... o/kit-153/

_________________
'06 Solar Yellow SWB, 1" BMML, 1.25" BL, 2" OME HD, Full Traction Shocks from BB, 255/85R16 KM2
'06 Liberty CRD green with budget lift
'43 Willys MB, work in progress
M416 Trailer


Top
 Profile  
 
 Post subject: Re: transfercase swap
PostPosted: Tue Aug 29, 2017 4:34 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
Go back and do a left side drop, everything will be so much easier

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: transfercase swap
PostPosted: Fri Sep 08, 2017 12:12 am 
Offline
LOST Member

Joined: Sun Mar 11, 2012 7:26 pm
Posts: 160
Mike_nvt wrote:
I have a question. I wanne convert my 2002 jeep liberty.

Ihave dana 44 axles with arb's and 4.56R&P. Only problem is the front axle is a passenger side drop. So i am looking to install a transfercase that has a passenger side output. Is it possible to install a dana 300 to my 45RFE transmission?


Suspension plans? 8)

A Dodge NP241 (early 90's; 23-spline; fixed-yoke) is another decent passenger-drop possibility.

_________________
Hers: 2005 KJ, V6/6spd/NV242J/3.73/posi, 2" Teraflex, ¾" cradle drop, KK forks, 22½" hub-to-flare, RRO arms, 245/75R16s, 260,000km
Mine: 1993 W250, Cummins/5spd/NP205/3.54, Lockright, ~3" lift, 315/75R16 Duratracs, extra smoke, more noise, 374,000km


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 21 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com