It is currently Thu Mar 28, 2024 10:33 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: JBA Long Travel IFS Build
PostPosted: Tue Aug 29, 2017 4:08 pm 
Offline
LOST Addict
User avatar

Joined: Tue Jun 04, 2013 1:21 pm
Posts: 2137
Location: Utah
http://jeepinbyal.com/trails/jeep-liberty-long-arm-build/

How did I not hear about this before!? I know he built this for a KK but looks like he could pretty easily swap it over to a KJ. I've always wanted to do a long arm kit for a liberty, glad to see someone did it.

_________________
2006 CRD - GTB2056 turbo by Dieselguy86, Eco Trans Tune, Lift Pump, Week's, HDS Tstat, Racor Filter, ARP's, OME 790's+Top Plate, JBA 2.5", JBA UCA, Moab's+265/75R16, ARB Bull Bar, 4.10's, TrueTracs


Top
 Profile  
 
 Post subject: Re: JBA Long Travel IFS Build
PostPosted: Tue Aug 29, 2017 4:31 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
mass-hole wrote:
http://jeepinbyal.com/trails/jeep-liberty-long-arm-build/

How did I not hear about this before!? I know he built this for a KK but looks like he could pretty easily swap it over to a KJ. I've always wanted to do a long arm kit for a liberty, glad to see someone did it.


Been done quite a while now, where have you been hiding ? :ROTFL:
Very easily could be done to a KJ , using basically all the same parts
BUT very deep pockets needed

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: JBA Long Travel IFS Build
PostPosted: Tue Aug 29, 2017 5:36 pm 
Offline
LOST Addict
User avatar

Joined: Tue Jun 04, 2013 1:21 pm
Posts: 2137
Location: Utah
tommudd wrote:
mass-hole wrote:
http://jeepinbyal.com/trails/jeep-liberty-long-arm-build/

How did I not hear about this before!? I know he built this for a KK but looks like he could pretty easily swap it over to a KJ. I've always wanted to do a long arm kit for a liberty, glad to see someone did it.


Been done quite a while now, where have you been hiding ? :ROTFL:
Very easily could be done to a KJ , using basically all the same parts
BUT very deep pockets needed


I would almost prefer a straight extended control arm swap like you see done on the pre-runner kits for the tacomas. That would be substantially cheaper and would give you more travel without binding the cv's and other issues we typically run into.


Sent from my iPhone using Tapatalk

_________________
2006 CRD - GTB2056 turbo by Dieselguy86, Eco Trans Tune, Lift Pump, Week's, HDS Tstat, Racor Filter, ARP's, OME 790's+Top Plate, JBA 2.5", JBA UCA, Moab's+265/75R16, ARB Bull Bar, 4.10's, TrueTracs


Top
 Profile  
 
 Post subject: Re: JBA Long Travel IFS Build
PostPosted: Thu Aug 31, 2017 10:24 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
No bind on that one JBA did, everything replaced except body and engine

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com