LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

JBA Long Travel IFS Build
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=87106		 Page 1 of 1
Author:  mass-hole [ Tue Aug 29, 2017 4:08 pm ]
Post subject:  JBA Long Travel IFS Build
http://jeepinbyal.com/trails/jeep-liberty-long-arm-build/

How did I not hear about this before!? I know he built this for a KK but looks like he could pretty easily swap it over to a KJ. I've always wanted to do a long arm kit for a liberty, glad to see someone did it.
Author:  tommudd [ Tue Aug 29, 2017 4:31 pm ]
Post subject:  Re: JBA Long Travel IFS Build
mass-hole wrote:
http://jeepinbyal.com/trails/jeep-liberty-long-arm-build/

How did I not hear about this before!? I know he built this for a KK but looks like he could pretty easily swap it over to a KJ. I've always wanted to do a long arm kit for a liberty, glad to see someone did it.


Been done quite a while now, where have you been hiding ? :ROTFL:
Very easily could be done to a KJ , using basically all the same parts
BUT very deep pockets needed
Author:  mass-hole [ Tue Aug 29, 2017 5:36 pm ]
Post subject:  Re: JBA Long Travel IFS Build
tommudd wrote:
mass-hole wrote:
http://jeepinbyal.com/trails/jeep-liberty-long-arm-build/

How did I not hear about this before!? I know he built this for a KK but looks like he could pretty easily swap it over to a KJ. I've always wanted to do a long arm kit for a liberty, glad to see someone did it.


Been done quite a while now, where have you been hiding ? :ROTFL:
Very easily could be done to a KJ , using basically all the same parts
BUT very deep pockets needed


I would almost prefer a straight extended control arm swap like you see done on the pre-runner kits for the tacomas. That would be substantially cheaper and would give you more travel without binding the cv's and other issues we typically run into.


Sent from my iPhone using Tapatalk
Author:  tommudd [ Thu Aug 31, 2017 10:24 pm ]
Post subject:  Re: JBA Long Travel IFS Build
No bind on that one JBA did, everything replaced except body and engine
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/