I see JBA has rebuildable joints for their UCA's now. I just found out my upper joints on my JBA UCA's have a little slop so I am going to replace them. Are there any disadvantages going to the JBA joints over Moog's?

_________________
2006 CRD - GTB2056 turbo by Dieselguy86, Eco Trans Tune, Lift Pump, Week's, HDS Tstat, Racor Filter, ARP's, OME 790's+Top Plate, JBA 2.5", JBA UCA, Moab's+265/75R16, ARB Bull Bar, 4.10's, TrueTracs

Same price
Rebuildable
Lots more ability to flex ( more degrees of movement

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Cool. I bought em cause they are making a lot of noise now. I was not sure since some of these off road joints require more maintenance.

_________________
2006 CRD - GTB2056 turbo by Dieselguy86, Eco Trans Tune, Lift Pump, Week's, HDS Tstat, Racor Filter, ARP's, OME 790's+Top Plate, JBA 2.5", JBA UCA, Moab's+265/75R16, ARB Bull Bar, 4.10's, TrueTracs

I've been running them (JBAs ) a long time now , many miles and they are doing great

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

About to replace mine too about 8k abusive miles on them. Got them this past March.

_________________
L.O.S.T. #31000

'03 KJ Freedom Edition - 4" JBA Coilover Lift w/ 32" Cooper STT PROs
'98 XJ Sport - 6" Full-Traction 4-Link Long Arm - Jeepspeed #2731 (Race Jeep)

DobermanRacing.com - Team Driver
Sponsored by UltRanger & CellTech

only 8000 miles ?
Dang you must not care for the poor KJ

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

I just got these installed today. Definitely solid units.

The freaking original ball joint spacer that came with the JBA arms had corroded itself onto both the ball joint stem and the spindle so that they were basically one solid chunk. Took almost 4 hours of putting the weight of the Jeep on the upper arm with a 2x4 and spraying it with PB blaster before it broke free.


Sent from my iPhone using Tapatalk

_________________
2006 CRD - GTB2056 turbo by Dieselguy86, Eco Trans Tune, Lift Pump, Week's, HDS Tstat, Racor Filter, ARP's, OME 790's+Top Plate, JBA 2.5", JBA UCA, Moab's+265/75R16, ARB Bull Bar, 4.10's, TrueTracs

And exactly why several parts like that get washed on a regular basis summer and winter, plus sprayed with Aerokroil
Never have any issues with anything not coming apart

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited