LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
Need Help http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=87366 |
Page 1 of 1 |
Author: | BillSanderson286 [ Mon Oct 30, 2017 5:49 pm ] |
Post subject: | Need Help |
Replacing front drivers side lower balljoint on an 03 KJ and can't get the CV shaft out. Is there a certain way that it comes out or whats going on? Sent from my N9560 using Tapatalk |
Author: | WWDiesel [ Mon Oct 30, 2017 8:33 pm ] |
Post subject: | Re: Need Help |
BillSanderson286 wrote: Replacing front drivers side lower balljoint on an 03 KJ and can't get the CV shaft out. Is there a certain way that it comes out or whats going on? Sent from my N9560 using Tapatalk Out of what? The hub bearing? |
Author: | tommudd [ Tue Oct 31, 2017 1:00 am ] |
Post subject: | Re: Need Help |
Pop upper and lower ball joints out, remove nut from CV, and pop it off , sometimes a few love taps is needed ( with nuton to not damage threads on end of CV |
Author: | HER_CRD [ Tue Oct 31, 2017 9:49 am ] |
Post subject: | Re: Need Help |
I remember when I did ball joints on mine the CV shaft was seized into the hub pretty good. Ended up using a 3 jaw puller to shaft out. Sent from my HTC6525LVW using Tapatalk |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |