It is currently Thu Mar 28, 2024 8:47 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: Photo of Rear Brake Line relocation/bracket
PostPosted: Tue Nov 14, 2017 9:12 pm 
Offline
LOST Newbie

Joined: Tue Jan 04, 2011 11:46 am
Posts: 30
Before I get into my lift install, Im trying to figure out exactly what needs to be moved and to where in regard to the rear driver side brake lines....Looking for a really good photo. Call me paranoid, but want to be prepared!!! Thank you!


Top
 Profile  
 
 Post subject: Re: Photo of Rear Brake Line relocation/bracket
PostPosted: Wed Nov 15, 2017 1:10 pm 
Offline
LOST Junkie

Joined: Fri Jul 08, 2005 11:03 am
Posts: 535
Location: NJ
What year liberty? How much lift? Post is vague.

_________________
L.O.S.T. #31000

'03 KJ Freedom Edition - 4" JBA Coilover Lift w/ 32" Cooper STT PROs
'98 XJ Sport - 6" Full-Traction 4-Link Long Arm - Jeepspeed #2731 (Race Jeep)

DobermanRacing.com - Team Driver
Sponsored by UltRanger & CellTech


Top
 Profile  
 
 Post subject: Re: Photo of Rear Brake Line relocation/bracket
PostPosted: Wed Nov 15, 2017 1:55 pm 
Offline
LOST Addict
User avatar

Joined: Tue Jun 04, 2013 1:21 pm
Posts: 2137
Location: Utah
I am assuming a 06-07 with 4 wheel abs.

I am pretty sure you could just get an aluminum sleeve and a longer bolt and just reposition the block down an inch or two. You just would need to bend the brake line slightly for the new angle.


Sent from my iPhone using Tapatalk

_________________
2006 CRD - GTB2056 turbo by Dieselguy86, Eco Trans Tune, Lift Pump, Week's, HDS Tstat, Racor Filter, ARP's, OME 790's+Top Plate, JBA 2.5", JBA UCA, Moab's+265/75R16, ARB Bull Bar, 4.10's, TrueTracs


Top
 Profile  
 
 Post subject: Re: Photo of Rear Brake Line relocation/bracket
PostPosted: Wed Nov 15, 2017 3:15 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
Very simple
1 inch wide flat bar
cut it 5 inches long
bend one end one inch in at right angle
then same on other end
drill a hole in each end in the center of the bend
remove bolt holding brakeline to frame use that bolt to bolt up one end of bracket
bolt brake line to other end
Have made several of these over the years but no pictures since its so simple to make

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 16 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com