Hey everyone. LOST Old timer here... Still have my 07 KJ, and I'm hoping someone else has a better memory than me. If TomMudd is still around, I'm sure he'd know.... I bought a pair of JBA extended UCAs years ago, and the ball joints have finally given out. I was wanting to order a pair of the new JBA rebuildable ball joints. But I see they are only for Gen 4.5+. I'm pretty sure mine are Gen 4.5, but hoping someone can help me verify. I bought them new, but second-hand from someone on here on LOST that sold their Liberty before installing them. So JBA won't be able to just look up my order... Can you tell from the attached pics if they are Gen 4.5?

TIA

_________________
2007 Light Khaki 4x2 Sport
- Debadged - LTT CAI with Amsoil Filter - JVC HD Radio - Infinity BassLink
- Iggee Seat Covers - Black Moabs - 265/75-16 Cooper Discoverer ATP - 4.10's
- DIY Franky sitting at 23.75" - Al's 4.5 UCAs - Trimmed F&R Bumpers
- Removed Rear Sway Bar - Removed Rear Vibration Damper
- 75k miles so far...

Found ya and answered over on JeepKJ

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Thanks Tom.

And just to follow up for others that may have the same question in the future, yes, my UCAs are Gen 4.5 and the new rebuilbable ball joints do fit these arms. Tom and Marlin from JBA both replied and verified. Thanks again.

_________________
2007 Light Khaki 4x2 Sport
- Debadged - LTT CAI with Amsoil Filter - JVC HD Radio - Infinity BassLink
- Iggee Seat Covers - Black Moabs - 265/75-16 Cooper Discoverer ATP - 4.10's
- DIY Franky sitting at 23.75" - Al's 4.5 UCAs - Trimmed F&R Bumpers
- Removed Rear Sway Bar - Removed Rear Vibration Damper
- 75k miles so far...