LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

OME's are dead. Need Bilstein part #s
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=89681		 Page 1 of 1
Author:  amir.flores [ Tue Feb 05, 2019 11:32 am ]
Post subject:  OME's are dead. Need Bilstein part #s
Front and Rear shocks are dead on my 2005 KJ. Currently have OME all around.

Can anyone help me with the part number for Bilsteins front and rear shocks for this KJ. (Lift 3 inches with OME coil springs)

Thanks!
Author:  WWDiesel [ Tue Feb 05, 2019 12:13 pm ]
Post subject:  Re: OME's are dead. Need Bilstein part #s
amir.flores wrote:
Front and Rear shocks are dead on my 2005 KJ. Currently have OME all around.
Can anyone help me with the part number for Bilsteins front and rear shocks for this KJ. (Lift 3 inches with OME coil springs)
Thanks!

Shocks:
Bilstein Brand: 4600 Heavy Duty (B6)
Part Number Position
24-139168 Front
24-139175 Rear

When lifted, 4600 Heavy Duty (B6) PN: 33-185859 for the rear of the Dodge Dakota (club cab 4x4 only) works great up to a 4 inch lift.

ShockWarehouse.com is good place to purchase Bilstein Shocks for any vehicle.
https://www.shockwarehouse.com/index.cfm
Author:  amir.flores [ Tue Feb 05, 2019 12:53 pm ]
Post subject:  Re: OME's are dead. Need Bilstein part #s
WWDiesel wrote:
amir.flores wrote:
Front and Rear shocks are dead on my 2005 KJ. Currently have OME all around.
Can anyone help me with the part number for Bilsteins front and rear shocks for this KJ. (Lift 3 inches with OME coil springs)
Thanks!

Shocks:
Bilstein Brand: 4600 Heavy Duty (B6)
Part Number Position
24-139168 Front
24-139175 Rear

When lifted, 4600 Heavy Duty (B6) PN: 33-185859 for the rear of the Dodge Dakota (club cab 4x4 only) works great up to a 4 inch lift.

ShockWarehouse.com is good place to purchase Bilstein Shocks for any vehicle.
https://www.shockwarehouse.com/index.cfm



Thank you for the information. Do I need to get new bushings if I go with the 4600 Heavy Duty (33-185859) for the rear of the Dodge Dakota? Or will the bushings that come with that shock fit the Liberty?
Author:  WWDiesel [ Tue Feb 05, 2019 2:22 pm ]
Post subject:  Re: OME's are dead. Need Bilstein part #s
amir.flores wrote:
WWDiesel wrote:
amir.flores wrote:
Front and Rear shocks are dead on my 2005 KJ. Currently have OME all around.
Can anyone help me with the part number for Bilsteins front and rear shocks for this KJ. (Lift 3 inches with OME coil springs)
Thanks!

Shocks:
Bilstein Brand: 4600 Heavy Duty (B6)
Part Number Position
24-139168 Front
24-139175 Rear
When lifted, 4600 Heavy Duty (B6) PN: 33-185859 for the rear of the Dodge Dakota (club cab 4x4 only) works great up to a 4 inch lift.
ShockWarehouse.com is good place to purchase Bilstein Shocks for any vehicle.
https://www.shockwarehouse.com/index.cfm

Thank you for the information. Do I need to get new bushings if I go with the 4600 Heavy Duty (33-185859) for the rear of the Dodge Dakota? Or will the bushings that come with that shock fit the Liberty?

My understanding is they fit perfectly and come with everything needed.
But someone like T Mudd could answer that question for sure as I believe he has installed many sets of the rear Dakota shocks on KJs.
Author:  amir.flores [ Tue Feb 05, 2019 5:56 pm ]
Post subject:  Re: OME's are dead. Need Bilstein part #s
Thank you for the information. Do I need to get new bushings if I go with the 4600 Heavy Duty (33-185859) for the rear of the Dodge Dakota? Or will the bushings that come with that shock fit the Liberty?[/quote]
My understanding is they fit perfectly and come with everything needed.
But someone like T Mudd could answer that question for sure as I believe he has installed many sets of the rear Dakota shocks on KJs.[/quote]


OK thanks! I appreciate it. Hopefully someone can confirm if the rear shocks for the Dakota will work as is without modification.

The OME's lasted me 17,000 miles in two years and they are completely dead now. I was expecting much more out of them. Going to give Bilsteins a try now.
Author:  tommudd [ Tue Feb 05, 2019 8:18 pm ]
Post subject:  Re: OME's are dead. Need Bilstein part #s
amir.flores wrote:
Thank you for the information. Do I need to get new bushings if I go with the 4600 Heavy Duty (33-185859) for the rear of the Dodge Dakota? Or will the bushings that come with that shock fit the Liberty?

My understanding is they fit perfectly and come with everything needed.
But someone like T Mudd could answer that question for sure as I believe he has installed many sets of the rear Dakota shocks on KJs.[/quote]


OK thanks! I appreciate it. Hopefully someone can confirm if the rear shocks for the Dakota will work as is without modification.

The OME's lasted me 17,000 miles in two years and they are completely dead now. I was expecting much more out of them. Going to give Bilsteins a try now.[/quote]

JBA has the bushing kit
Author:  robertp2alt [ Tue Jul 02, 2019 7:59 am ]
Post subject:  Re: OME's are dead. Need Bilstein part #s
When I check the information for the front struts it says that they are for a vehicle with 0” lift, please advice.

Image


Sent from my iPhone using Tapatalk
Author:  WWDiesel [ Tue Jul 02, 2019 11:31 am ]
Post subject:  Re: OME's are dead. Need Bilstein part #s
robertp2alt wrote:
When I check the information for the front struts it says that they are for a vehicle with 0” lift, please advice.

With the amount of travel they have, they will work fine for a vehicle up to 2.5" lift. Anything with higher lift really needs to go to Coil Overs and upper control arms by JBA.

A good place to buy Bilstein Shocks is Shock Warehouse:> https://www.shockwarehouse.com/index.cf ... _year=2005
They have free shipping also! :D
Author:  GordnadoCRD [ Tue Jul 02, 2019 6:43 pm ]
Post subject:  Re: OME's are dead. Need Bilstein part #s
https://www.amazon.com/gp/product/B079QNK71P/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/