Wow, I'm only at 16" up front and 15" in rear from ground to bottom of the pinch weld. But then again, my KJ weighs 4,800 lbs.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Pinch weld height post lift? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=9034 |
Page 1 of 1 |
| Author: | Mutt [ Mon May 29, 2006 7:53 pm ] |
| Post subject: | Pinch weld height post lift? |
What are ya'll running for pinch weld height after your lift? I'm currently at 17 3/4" in the front and 17 1/4" in the back. I'm going to raise the back another .500" and maybe go the full 1". |
|
| Author: | Neal [ Mon May 29, 2006 8:31 pm ] |
| Post subject: | |
Am at 17 3/4 front and rear with 2 extra spring isolators on each side(3 total per side) in rear. I purchased the 4 isolators from Mopar Parts for about $30. Running 245-75-16 tires. Quinn didn't want to supply them for free to level it out. |
|
| Author: | AdamIsAdam [ Thu Jun 01, 2006 10:16 pm ] |
| Post subject: | |
Wow, I'm only at 16" up front and 15" in rear from ground to bottom of the pinch weld. But then again, my KJ weighs 4,800 lbs.
|
|
| Author: | 2006KJSPORT4x4 [ Fri Jun 02, 2006 12:03 am ] |
| Post subject: | |
I'll measure mine tomorrow and then we'll have 3 different lift styles to compare height with.... |
|
| Author: | 2006KJSPORT4x4 [ Fri Jun 02, 2006 4:53 pm ] |
| Post subject: | |
Well, I just measured mine here at work and I have 16 3/4" front and about 16 1/4" rear...there is a stock '02 (pre-lowered) that one of the guys here at work drives and I'll measure his monday (he's off today) and see how much a difference it is compared to the lifted ones.... |
|
| Author: | SKIDOG [ Fri Jun 02, 2006 5:19 pm ] |
| Post subject: | |
Hey Mutt, I was wondering why I was staring at the sky.  I'm 16 3/8 in the front and 16 1/2 in the back. Does that mean your keeping the KJ ?????
|
|
| Author: | Mutt [ Fri Jun 02, 2006 5:22 pm ] |
| Post subject: | |
SKIDOG wrote: Hey Mutt, I was wondering why I was staring at the sky.
I'm 16 3/8 in the front and 16 1/2 in the back. Does that mean your keeping the KJ ?????Yes, I'm keeping it, I'm over my raniting temper tantrum. Yours seems to sit almost level, being a touch higher in the rear.....Hmmm. |
|
| Author: | jeepkj02 [ Fri Jun 02, 2006 8:07 pm ] |
| Post subject: | |
Forgive my ignorance, but where is the pinch weld? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|