Jeepin by Al

Jindosjeep · **Posted:** Sat Sep 14, 2019 8:15 pm

Just wondering if jeepin by al is still in business, looking for the 1.5"lift?
02Limited 2wd

WWDiesel · **Posted:** Sat Sep 14, 2019 10:45 pm

Jindosjeep wrote:

Just wondering if jeepin by al is still in business, looking for the 1.5"lift?
02Limited 2wd

Not sure about JBA, seems all his lift kits say "Out of stock" :shock:

Google "OME 1.5" lift for jeep liberty 2002", plenty of the kits available and listed by several other online vendors. :google:

Jindosjeep · **Posted:** Sun Sep 15, 2019 9:39 am

Thank You, I read somewhere that OME wasn't producing Liberty parts anymore!

JeepinJarhead03 · **Posted:** Sun Oct 13, 2019 10:43 pm

OME's still producing the same variety, and JBA is still producing the UCA's, so the "standard" OME route lift is still 100% available. For most either the (2927) 927's or (2790) 790 front springs and (2948) 948 rear springs with a variety of conduit nut clevis lift or 1/4-3/8th top plate for the front, and extra upper rear spring isolators on the rear for leveling is the general plan. having shelf space taken up, and a large investment in parts and material for kits that are infrequently sold are pretty heavy burdeons on vendors, especially small ones. The only OME offering that limbo'ed for awhile was the 132-L rear shock, which i think they even restarted making those after a few year hiatus.

CRD_Joe · **Posted:** Mon Feb 03, 2020 2:37 pm

JBA is still around. As I understand it he builds per order. It makes sense not to carry a lot of expensive stuff in stock.

My66dodge · **Posted:** Tue Feb 04, 2020 10:14 am

As per my discussion with JBA on the phone, they are only making upper control arms and will not be making lifts for the kJ... I tried to add a little extra to the price and entice him to build me a 4in gold kit but they are streamlining their operation.

Sent from my iPhone using Tapatalk

CRD_Joe · **Posted:** Wed Feb 05, 2020 10:15 am

My66dodge wrote:

As per my discussion with JBA on the phone, they are only making upper control arms and will not be making lifts for the kJ... I tried to add a little extra to the price and entice him to build me a 4in gold kit but they are streamlining their operation.

Sent from my iPhone using Tapatalk

Sad. I should have picked up one while they were available.

My66dodge · **Posted:** Wed Feb 05, 2020 2:33 pm

CB engineering makes a kit for the front and extended control arms for the rear and I have a local company I will use for the rear springs, I already cut down some axles so now I gotta find the extended brake lines

Sent from my iPhone using Tapatalk

Mountainman · **Posted:** Wed Feb 05, 2020 8:24 pm

With a 4in kit, wouldnt you want a steel front dif? I talked with him about that, and he sounded like he might produce a run if we had enough buyers up front. Would probably take 10. I would have bought one sooner if I only knew...

My66dodge · **Posted:** Wed Feb 05, 2020 11:18 pm

It should be fine

Sent from my iPhone using Tapatalk

CRD_Joe · **Posted:** Wed Feb 05, 2020 11:39 pm

I would take a 4" JBA lift kit if I could get one now.

JJam2112 · **Joined:** Thu Feb 14, 2019 12:24 am **Posts:** 8

Mountainman wrote:

With a 4in kit, wouldnt you want a steel front dif? I talked with him about that, and he sounded like he might produce a run if we had enough buyers up front. Would probably take 10. I would have bought one sooner if I only knew...

I would commit if he is going to make a batch. Let me know if he does it

Jeepin by Al

Who is online