LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Rear control arm questions
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=91133		 Page 1 of 1
Author:  andrew.wenmoth [ Thu Mar 26, 2020 12:30 pm ]
Post subject:  Rear control arm questions
Hey yall
Just got in my wwdiesel mount for the iro arm, arm is en route and should arrive next week. Im seeing if anyone knows the size and thread of the body side upper control arm bolts. Mine are decently rusty, and want to replace them when i install the new arm. I know i can take them to the parts store with me and measure, but once they are out i do not have a second vehicle to take me there.
Thanks in advance!


Sent from my iPhone using Tapatalk
Author:  WWDiesel [ Thu Mar 26, 2020 2:57 pm ]
Post subject:  Re: Rear control arm questions
andrew.wenmoth wrote:
Hey yall
Just got in my wwdiesel mount for the iro arm, arm is en route and should arrive next week. Im seeing if anyone knows the size and thread of the body side upper control arm bolts. Mine are decently rusty, and want to replace them when i install the new arm. I know i can take them to the parts store with me and measure, but once they are out i do not have a second vehicle to take me there.
Thanks in advance!

Easy:
Metric Bolt
Mounting, Upper. Hex Flange Head. M12x1.75x117. (Grade 10.9)
This Fits Your 2005 Jeep Liberty LIMITED EDITION 2.8L Turbo 4 Cyl Diesel A/T 4X4
Part Number: 06504748

You may have to purchase a slightly longer one and cut it off. :juggle:
https://www.boltdepot.com/Product-Detai ... oduct=6779

Dorman:
Part Number: 460-697 (box of 10)
Author:  andrew.wenmoth [ Fri Apr 03, 2020 5:58 pm ]
Post subject:  Re: Rear control arm questions
Thanks ww! Ended up ordering the above, and you dont need to cut any off! Above the “nut” in the body is a bit of empty space, and seeing as how these are only 3mm too long, by the time you add a washer at the head theres only a mm or two hanging out the nut side and theres plenty of room. Thanks for you help above and with getting the arm back in!


Sent from my iPhone using Tapatalk
Author:  WWDiesel [ Fri Apr 03, 2020 11:05 pm ]
Post subject:  Re: Rear control arm questions
andrew.wenmoth wrote:
Thanks ww! Ended up ordering the above, and you dont need to cut any off! Above the “nut” in the body is a bit of empty space, and seeing as how these are only 3mm too long, by the time you add a washer at the head theres only a mm or two hanging out the nut side and theres plenty of room. Thanks for you help above and with getting the arm back in!

Thanks for the info, that's good to know going forward.
Enjoy your new HD IronRock rear upper control arm, the last one you will ever have to purchase... :BANANA:
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/