Can anybody who has an ARB compressor post up some pics of their compressor location? I got one from Lilmatty (thanks again!) and will probably just go with his idea, but just was wondering what others have done.

Thanks!

I have seen them under the hood as well as under the front seats (LOUD!) and behind the plastic in the cargo area (under the fixed glass).

_________________
Richard~Mid Atlantic VA Rep.
NCBBA/Mid Atlantic Jeepers/UFWDA Member
Mid-Atlantic & Carolina LOST #236236
2006 TJ Solar Yellow Rubicon
Lockers, Springs, Skids, Headers, Snorkel,
Exhaust Work, 4.5 Long Arm, Warn M8000
315/75/16 Nitto Terra Grapplers Moab's/SpiderTrax, 6000k HID, IPF H4

i have mine under the driver seat
i only use it for the locker so when it is on it is just for a very short time then it goes off and stays off
even when it is on the noise is less than when i drive down the highway its in a TJ

I put mine behind the airbox, I had to make a braket, and mounted it using 2 of the strut bolts and then drilled 2 holes for the other side, and had to make a custom bracket for and relocate my cruise control vacume actuator.

_________________
I'm baaaaccckkk...
LOST Member 10
If you can read this you don't need glasses, go Wheel your Jeep!

Ok. Just to republish my ARB location. Note I made a mount out of a hunk of metal and put it on the back firewall using exisitng nuts. Location is nice as it's right there where the battery is and also near where the switches will go. Makes the wiring pretty clean and simple.





http://lostkjnorcal.com/ARBCompressorPic1.html

_________________
Matt Townsend
Sebastopol CA

02 Red Libby w/Frankenlift, Full armor incl AllJ stuff, 245 MTRs on Cragars, ARB locker, custom rack, K&N FIPK, 8000lb winch, RE rear LCAs, Optima Yellow Top, RL Rear Bumper, Custom Front Bumper
98 TJ w/5.5" RE Long arm lift, ARB front/rear, 35x12.5, Borla, Warn winch, Teralow, etc., etc..

Here is my compessor,it's bolted to my heat shield for the air filter. [img][img]http://memimage.cardomain.net/member_images/11/web/2327000-2327999/2327424_37_full.jpg[/img]

just our of curiousity, which intake system is that you have, and did it come with that heat shield?

The kit I have is AFE with a AEM syn.air filter,yes it came with the heatshield.It's a nice kit,uses a composite tube instead of a metal one to keep the air charge temp down and weighs less.