I put mine behind the airbox, I had to make a braket, and mounted it using 2 of the strut bolts and then drilled 2 holes for the other side, and had to make a custom bracket for and relocate my cruise control vacume actuator.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| ARB compressor locations?? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=9139 |
Page 1 of 1 |
| Author: | DaveKJ02 [ Thu Jun 01, 2006 9:48 pm ] |
| Post subject: | ARB compressor locations?? |
Can anybody who has an ARB compressor post up some pics of their compressor location? I got one from Lilmatty (thanks again!) and will probably just go with his idea, but just was wondering what others have done. Thanks! |
|
| Author: | uvalax236 [ Thu Jun 01, 2006 9:51 pm ] |
| Post subject: | |
I have seen them under the hood as well as under the front seats (LOUD!) and behind the plastic in the cargo area (under the fixed glass). |
|
| Author: | jason thompson [ Thu Jun 01, 2006 10:11 pm ] |
| Post subject: | |
i have mine under the driver seat i only use it for the locker so when it is on it is just for a very short time then it goes off and stays off even when it is on the noise is less than when i drive down the highway its in a TJ |
|
| Author: | USAFCOP [ Fri Jun 02, 2006 9:05 am ] |
| Post subject: | |
I put mine behind the airbox, I had to make a braket, and mounted it using 2 of the strut bolts and then drilled 2 holes for the other side, and had to make a custom bracket for and relocate my cruise control vacume actuator.
|
|
| Author: | lilmatty [ Fri Jun 02, 2006 10:23 am ] |
| Post subject: | |
Ok. Just to republish my ARB location. Note I made a mount out of a hunk of metal and put it on the back firewall using exisitng nuts. Location is nice as it's right there where the battery is and also near where the switches will go. Makes the wiring pretty clean and simple. 
http://lostkjnorcal.com/ARBCompressorPic1.html |
|
| Author: | tjkj2002 [ Fri Jun 02, 2006 11:14 am ] |
| Post subject: | |
Here is my compessor,it's bolted to my heat shield for the air filter.  [img][img]http://memimage.cardomain.net/member_images/11/web/2327000-2327999/2327424_37_full.jpg[/img]
|
|
| Author: | ice_man_7c [ Fri Jun 02, 2006 11:16 am ] |
| Post subject: | |
tjkj2002 wrote: Here is my compessor,it's bolted to my heat shield for the air filter.
[img][img]http://memimage.cardomain.net/member_images/11/web/2327000-2327999/2327424_37_full.jpg[/img]just our of curiousity, which intake system is that you have, and did it come with that heat shield? |
|
| Author: | tjkj2002 [ Fri Jun 02, 2006 11:27 am ] |
| Post subject: | |
The kit I have is AFE with a AEM syn.air filter,yes it came with the heatshield.It's a nice kit,uses a composite tube instead of a metal one to keep the air charge temp down and weighs less. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|