Keep in mind, if you add a longer clevis, clevis spacers, top plate strut spacers, or any combination thereof, longer bump stops are recommended/required.
This is a old post/thread that you should read through to understand the dynamics of various methods of lifting a KJ.
Link:
Top Plate Spacer VS. Clevis Lift--------
2008 Model KK stock Clevis: OEM Part Number: 04670456AB
Clevis spacer rings go between the strut and clevis or strut fork and gives extra lift on the front end.
These rings can be used to lift and level the front end of the Jeep for added ground and / or tire clearance.
.250" Clevis Spacer = about 1/2" of actual lift.
.500" Clevis Spacer = about 1" of actual lift.
Many simply use some stacked 2" conduit nuts for clevis spacers. Readily available at your local hardware or builders supply store and cheap.
_________________
Supporting Vendor and Moderator of LOST05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount98 Dodge Cummins 24 Valve