Does anyone know if there is a plug and play LED bulb that fits the renegade light bar?

Thanks

_________________
2005 Liberty Sport CRD

GDE HOT Tune
GDE TCM
EH Mod
Euro T.C.
3" straight exhaust w/cat delete
Cone air filter
Ome lift springs
Bilstein shocks & struts

9006 led headlight bulbs


another good place to look:> https://www.superbrightleds.com/cat/led ... 6,197,8887:

Note: When possible, LED bulbs have to be positioned correctly according to the optical design of the headlamps. The diodes (LED chips) should always be in a side to side orientation, meaning, you should have one set of LED's facing at 3 o'clock and the other set facing at 9 o'clock.

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount
98 Dodge Cummins 24 Valve

Thank you.

_________________
2005 Liberty Sport CRD

GDE HOT Tune
GDE TCM
EH Mod
Euro T.C.
3" straight exhaust w/cat delete
Cone air filter
Ome lift springs
Bilstein shocks & struts

Let me know if you find any that work. When I did a quick search they all had a heatsink on the back that made them too big to fit in the light bar. I would've had to cut holes in the back of each one.

_________________
05CRD: GDE Hot ECU & TCM tunes, Provent, Cat filter, Facet lift pump, TransGo kit, Florida TC, Samcos, stainless brake lines, HDS thermostat, Renegade light bar,
RL super sliders, Bilstein adjustables, Al's Gen 4.5 Arms, 235/85-16 Duratracs, DTT rear, Elocker front, EVIC+TPMS, Turbo timer, McNally pillar gauges, Weeks Stage II kit.

Just curious, would these "fanless" types fit?
Note: 9005 bulbs will also have the same fitment.
9006 LED Fanless Headlight/Fog Light Conversion Kit with Adjustable Color Temperature and Compact Heat Sinks - 5,000 Lumens/Set

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount
98 Dodge Cummins 24 Valve

I went and looked and I think not. The back of the shroud fits very close to the bulb connector. I would say 1/2". Those heatsinks look like they protrude an extra inch.

_________________
05CRD: GDE Hot ECU & TCM tunes, Provent, Cat filter, Facet lift pump, TransGo kit, Florida TC, Samcos, stainless brake lines, HDS thermostat, Renegade light bar,
RL super sliders, Bilstein adjustables, Al's Gen 4.5 Arms, 235/85-16 Duratracs, DTT rear, Elocker front, EVIC+TPMS, Turbo timer, McNally pillar gauges, Weeks Stage II kit.