LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

LED replacement bulbs for Renegade light bar
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=91741		 Page 1 of 1
Author:  wfd1350 [ Sun Nov 15, 2020 10:27 am ]
Post subject:  LED replacement bulbs for Renegade light bar
Does anyone know if there is a plug and play LED bulb that fits the renegade light bar?

Thanks
Author:  WWDiesel [ Sun Nov 15, 2020 1:16 pm ]
Post subject:  Re: LED replacement bulbs for Renegade light bar
wfd1350 wrote:
Does anyone know if there is a plug and play LED bulb that fits the renegade light bar?
Thanks

:google: 9006 led headlight bulbs


another good place to look:> https://www.superbrightleds.com/cat/led ... 6,197,8887:

Note: When possible, LED bulbs have to be positioned correctly according to the optical design of the headlamps. The diodes (LED chips) should always be in a side to side orientation, meaning, you should have one set of LED's facing at 3 o'clock and the other set facing at 9 o'clock.
Author:  wfd1350 [ Mon Nov 16, 2020 9:27 am ]
Post subject:  Re: LED replacement bulbs for Renegade light bar
Thank you. :D
Author:  CATCRD [ Wed Dec 02, 2020 11:45 am ]
Post subject:  Re: LED replacement bulbs for Renegade light bar
Let me know if you find any that work. When I did a quick search they all had a heatsink on the back that made them too big to fit in the light bar. I would've had to cut holes in the back of each one.
Author:  WWDiesel [ Wed Dec 02, 2020 12:06 pm ]
Post subject:  Re: LED replacement bulbs for Renegade light bar
CATCRD wrote:
Let me know if you find any that work. When I did a quick search they all had a heatsink on the back that made them too big to fit in the light bar. I would've had to cut holes in the back of each one.

Just curious, would these "fanless" types fit?
Note: 9005 bulbs will also have the same fitment.
9006 LED Fanless Headlight/Fog Light Conversion Kit with Adjustable Color Temperature and Compact Heat Sinks - 5,000 Lumens/Set

Image
Author:  CATCRD [ Sun Dec 06, 2020 12:55 am ]
Post subject:  Re: LED replacement bulbs for Renegade light bar
I went and looked and I think not. The back of the shroud fits very close to the bulb connector. I would say 1/2". Those heatsinks look like they protrude an extra inch.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/