| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| yo ToOpen Country 255/65R16 AT3's with no rub on unlifted 20 http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=91913 |
Page 1 of 1 |
| Author: | davyvan [ Fri Apr 09, 2021 11:13 am ] |
| Post subject: | yo ToOpen Country 255/65R16 AT3's with no rub on unlifted 20 |
A major Improvement in cornering and ride! So far no rub on pavement at full lock, when I drive the Forest Service roads next week I'll be careful not to go full lock if the body is tilted because there is very little clearance between the tire and tie rod ends. The 255/65R16 AT3's are only slightly shorter (29.05" vs 29.29) than the factory 225/75R16's according to the Tacoma World tire size calculator, so the speedometer is still right on accurate. I'm glad I didn't listen to the folks who said the 255's would rub for sure with no lift and to go with taller 245/70/16's which sometimes do rub on the pinch welds. I might try bolt-on .5" spacers to get a little more clearance. |
|
| Author: | mercdude [ Wed Apr 28, 2021 8:26 pm ] |
| Post subject: | Re: yo ToOpen Country 255/65R16 AT3's with no rub on unlifte |
I’m riding on 235/75 (29.7”) and have absolutely no rubbing. But I have the early 02 kJ so it sits higher than most kJ stock and I added 1/2” spacer. Sent from my iPhone using Tapatalk |
|
| Author: | citylone [ Tue Jul 27, 2021 10:26 am ] |
| Post subject: | Re: yo ToOpen Country 255/65R16 AT3's with no rub on unlifte |
Nice choice of tires. I just checked out the same Toyo Tires on 4wheelonline. I am torn between that and the General GRABBER AT3 tires. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|