I've got a 2006 CRD with a JBA 4" lift kit. Recently the rear coil springs broke and i've been struggling to get replacement springs. JBA discontinued their lift kits in 2019 and could not advise me what the specifications of the coils in their lift kits were. On this forum someone mentioned dodge dakota springs as a possible fit, but i not 100% sure. Long story short can you guys advise me what rear coil springs would fit a 2006 CRD with 4 " lift. Thank you.

Find some place near you to duplicate it, the nearest place to me is pohl spring in Spokane wa and they custom made my rear springs for the 3inch lift I wanted with the spring rate I wanted. You will need to send a sample to someone to get it made… it’s less than you think to get custom springs made, I paid less than 200 for a pair a year ago


Sent from my iPad using Tapatalk

I'm probably the least expert on lifting since I haven't done that but I think JBA used Old Man Emu (OME) springs in their kits. OME springs are still available from other sources.

I haven't read of Dakota springs being used on Libertys but I have read about Dakota shocks being used.

IronMan Springs are also still available.

https://ironman4x4america.com/

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount
98 Dodge Cummins 24 Valve

OME springs will not give a 4 inch lift so they are not OME springs, they are a custom rate and length


Sent from my iPad using Tapatalk

Unfortunately, they've got only 1.5" lift springs.