LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
2005 CRD Seat Switch - Sensor Issues (Airbag & Occupancy) http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=92623 |
Page 1 of 1 |
Author: | andrewhall007au [ Tue Mar 21, 2023 7:35 am ] |
Post subject: | 2005 CRD Seat Switch - Sensor Issues (Airbag & Occupancy) |
Hi There, grateful for any help you can offer. I have a 2005 CRD Limited with Leather seats (power seats). I sourced some much nicer material seats from a 2004 Liberty sport and installed them. Now I have the seatbelt chime on (occupancy sensor) and airbag sensor on. Its very annoying. The connectors all fit fine between the different seats, but the # pins etc looks different. So it looks as though the computer is actively looking for something that is not there (i.e. 4 pins on connector on drivers seat in old model vs 2 on replacement seats) Can these issues be solved by fooling the computer through resistors (i.e. putting in leather seat connectors and wiring up a resistor on the missing parts) or is something more sinister at work here? Has anyone successfully managed this in the past? Cheers Andrew |
Author: | andrewhall007au [ Fri Mar 24, 2023 7:44 pm ] |
Post subject: | Re: 2005 CRD Seat Switch - Sensor Issues (Airbag & Occupancy |
Hi forum - thought I would try to bump the post to see if anyone had some insights! Thanks in advance! |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |