skidplate dont fit

wuze · **Posted:** Tue Jun 20, 2006 6:53 am

hi
my problem is that we normaly dont have the transmission skidplates here in austria, so i had to made a special order.

now i want to mount but it dont fit :cry:

the # is 1-82210003

it looks like that it is to short.
have i the wrong plate :?:

2004 2.8 crd with 2.5 lift, 245/75-16 cooper stt and a powertrax no slip locker

greetings from europe

wuze

Jeepjeepster · **Posted:** Wed Jun 21, 2006 8:47 pm

Here is what Mine looks like. Maybe they used some weird tranny and cross-member?

corwyyn · **Posted:** Thu Jun 22, 2006 3:14 am

It looks like you have the right one. I found another number in this thread: http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=884&highlight=transmission+skid and that number was 52128925AC but after looking at the justforjeeps.com website it looks like the number for the one you have supercedes this one. You might check with some of the people who posted in that thread to see how they handled it. You might also check out the CRD section on teh forum - lots of good reading for a diesel KJ owner

Good luck to ya.

Guyute1210 · **Posted:** Thu Jun 22, 2006 2:57 pm

You have the correct one, all you need to do is get some Grade-8 lugs, bolts and washers, and drill your crossmember for that other hole.

wuze · **Posted:** Fri Jun 23, 2006 2:14 am

thanks for your help

now my car is protected and ready for offroad use.

wuze

skidplate dont fit

Who is online