LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
HELP Loslt Transfer case position indication http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=9787 |
Page 1 of 1 |
Author: | Fouros [ Sun Jun 25, 2006 4:50 pm ] |
Post subject: | HELP Loslt Transfer case position indication |
Can anybody help please was playing with the KJ on the weekend and i have lost the Position Indication for my Tfer case Lever i does not display if i am in part time , full time or 4low...... is there a sender or sensor i can check and if there is where is it thanks guys |
Author: | Jeepjeepster [ Sun Jun 25, 2006 5:34 pm ] |
Post subject: | Re: HELP Loslt Transfer case position indication |
Fouros wrote: Can anybody help please
was playing with the KJ on the weekend and i have L.O.S.T. the Position Indication for my Tfer case Lever i does not display if i am in part time , full time or 4low...... is there a sender or sensor i can check and if there is where is it thanks guys The sensor is on the tranfer case. What were you doing? Define "playing." |
Author: | Fouros [ Sun Jun 25, 2006 5:48 pm ] |
Post subject: | |
I was just about to start to test my new mud tyres and went to put it into part time 4wd and there was no visual indication that the transfer case lever had been moved into PT 4WD, the last time i used it was the week before in the wet when i put it into full time as it was raining and VERY slippery on the Bitumen ( it worked then ) |
Author: | DarbyWalters [ Sun Jun 25, 2006 10:33 pm ] |
Post subject: | |
You should see some lights in your instrument cluster... Amber Part-Time Green Full-Time or are you saying that those are not waht is working? |
Author: | Fouros [ Sun Jun 25, 2006 11:27 pm ] |
Post subject: | |
yes mate the part time, Full time and 4LOW lamps are not working, also when 4 low is selected the revs dont change anymore, all other warning lamps are working BUT when you do the instrument test ( hold in reset turn ignition to on the part time , full time and 4 low lamps work ) so i am thinking there is a connector loose or wire cut somewhere under the KJ i just dont know where to look any help would be appreciated |
Author: | tjkj2002 [ Sun Jun 25, 2006 11:49 pm ] |
Post subject: | |
Does it seem like the transfer is going into gear? Might want to check the shifter cable or shifter if it doesn't feel like it's going into gear. |
Author: | Fouros [ Tue Jun 27, 2006 12:18 am ] |
Post subject: | |
Had the KJ checked today , the switch on the transfer case is faulty , waiting for one to arrive from the states now |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |