| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| F drill bit http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=30&t=10202 |
Page 1 of 1 |
| Author: | phxtoad [ Fri Jul 07, 2006 6:44 pm ] |
| Post subject: | F drill bit |
Hola everyone, Anyone have the 'F' drill bit needed to install Boulder Bars? Or anyone know of a PHX area source for them? Thanks, Todd |
|
| Author: | pixeldzn [ Fri Jul 07, 2006 6:53 pm ] |
| Post subject: | |
Try sears. they keep them by the die and tap stuff as that is what you would normally use that bit for. If not, you can get away with a .25 inch as the F is .257 in reality. I broke both F bits I had and had to finish with the .25 and it worked out fine. |
|
| Author: | corwyyn [ Sat Jul 08, 2006 2:31 am ] |
| Post subject: | |
Todd, I have one if you need to use it. I PM'd you my cell number. |
|
| Author: | desertkj [ Sat Jul 08, 2006 12:21 pm ] |
| Post subject: | |
The boulder bars website also mentions getting one from them for $2.00. It'll probably take a while to get but as a last resort it would work. *EDIT: Duh. Never mind you said PHX area source. |
|
| Author: | phxtoad [ Mon Jul 10, 2006 11:27 am ] |
| Post subject: | Bit |
I'll give Sears a shot first. Thanks everyone. TL |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|