For the AZ peeps first

Neatus · **Posted:** Wed Sep 23, 2009 4:12 pm

I have been collecting front end spares for a while now. I have to much stuff. If anyone would like to buy some of it I will give a good deal.

I have some stock upper control arms with loose ball joints(great trail spares) - Free

I have a set of the latest generation JBA upper contol arms, probably have about 6,000 miles on them look brand new - $150

I have an open front Dana30A with 4:10 gears - $150

Passenger and drivers side CVs...one I believe has about 5,000 miles(drivers side, looks like it is from NAPA) and one has 15,000ish miles(passenger side don't know what brand) both very good condition $60 each

two sets of lower control arms, don't know why I got these(maybe because they were free to me)...free

brand new in the box pair of MOOG replacement ball joints, $25 for the pair.

one very new looking hub bearing, still shiney, $50

Also have one new spark plug coil pack that I didn't need, $15

I am still unpacking my new garage so I may add more stuff later.

corwyyn · **Posted:** Wed Sep 23, 2009 5:06 pm

New garage, did you get into a house? PM coming your way.

eyehatetofu · **Posted:** Wed Sep 23, 2009 5:21 pm

PM sent

Albert · **Posted:** Wed Sep 23, 2009 5:40 pm

Tom Mudd is heading to AZ right now on a parts run..... :lol:

corwyyn · **Posted:** Wed Sep 23, 2009 6:23 pm

Albert wrote:

Tom Mudd is heading to AZ right now on a parts run..... :lol:

It won't matter because they will all be gone by then. Muuwahahahahahaha, sweet second hands parts all for me, for ME!!!!!

Actually I'm just looking at the JBA arms and the Moogs, I already have Ernie's old gas tank skid on mine, and JJ's used roof rack, also soon to be added is his well-used SS1 tranny skid (SCORE!).

Neatus · **Posted:** Wed Sep 23, 2009 11:57 pm

Okay, the arms, MOOGs and dif are all spoken for....I will be delivering everything after the weekend of October 3rd....I will get teh stuff to Phx area for you guys.

Neatus · **Posted:** Wed Sep 23, 2009 11:59 pm

corwyyn wrote:

New garage, did you get into a house? PM coming your way.

Yes, I am in a house in Tucson

Neatus · **Posted:** Thu Sep 24, 2009 8:19 pm

The Dana 30A with 4:10s is still for sale

djui5 · **Joined:** Tue Jun 17, 2008 1:38 am **Posts:** 536

I need the passenger CV please!!! Mine is poppin like jiffy pop. :lol:

edit, btw are the lower control arms for the front? If so are the bushings good? If so I'll take those too. My bushings are done. Do you have any lower strut tower bushings in good shape?

Jeepjeepster · **Posted:** Sat Sep 26, 2009 11:55 am

My gosh! A diff for $150?! I want I want!

Neatus · **Posted:** Sun Sep 27, 2009 1:08 pm

djui5 wrote:

I need the passenger CV please!!! Mine is poppin like jiffy pop. :lol:

edit, btw are the lower control arms for the front? If so are the bushings good? If so I'll take those too. My bushings are done. Do you have any lower strut tower bushings in good shape?

Give me till after next weekend and I will get them to you. Yes, the bushings are good in the front lowers. No lower strut tower bushings but I am sure you can find those for cheap brand new. PM me your phone number.

Jeepjeepster · **Posted:** Fri Oct 09, 2009 11:44 pm

Have you considered shipping the front diff or? Cant imagine it would cost a whole lot to ship it.

Neatus · **Posted:** Sat Oct 10, 2009 9:54 am

Jeepjeepster wrote:

Have you considered shipping the front diff or? Cant imagine it would cost a whole lot to ship it.

I actually weighs a lot....I was surprised. I can check on it if you like but I would rather not ship. If ya really really really want it I may go through the extra effort. PM me with your zip.

For the AZ peeps first

Who is online