LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
Gear Shop http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=31&t=39849 |
Page 1 of 1 |
Author: | hallb4 [ Tue Feb 03, 2009 5:43 pm ] |
Post subject: | Gear Shop |
Anyone know of a good 4x4 shop that could regear both diffs for me? I know this forum is typically quiet but I figured I could take a shot at it. Thanks |
Author: | daspes [ Tue Feb 03, 2009 7:14 pm ] |
Post subject: | Re: Gear Shop |
hallb4 wrote: Anyone know of a good 4x4 shop that could regear both diffs for me?
I know this forum is typically quiet but I figured I could take a shot at it. Thanks I'm in for the ride on this one... Shop on the island wants $800 in labor alone. |
Author: | KJ Willy [ Tue Feb 03, 2009 7:22 pm ] |
Post subject: | |
$800 is cheap for what I am finding, I am getting all the stuff myself and going to be paying anywhere from $1000 to $1500 for th install this is with the lockers but only an extra $400 for them. |
Author: | tjkj2002 [ Tue Feb 03, 2009 8:25 pm ] |
Post subject: | Re: Gear Shop |
daspes wrote: hallb4 wrote: Anyone know of a good 4x4 shop that could regear both diffs for me? I know this forum is typically quiet but I figured I could take a shot at it. Thanks I'm in for the ride on this one... Shop on the island wants $800 in labor alone. |
Author: | daspes [ Tue Feb 03, 2009 8:27 pm ] |
Post subject: | Re: Gear Shop |
tjkj2002 wrote: daspes wrote: hallb4 wrote: Anyone know of a good 4x4 shop that could regear both diffs for me? I know this forum is typically quiet but I figured I could take a shot at it. Thanks I'm in for the ride on this one... Shop on the island wants $800 in labor alone. Thats on the JK, not the KJ, sorry. |
Author: | hallb4 [ Thu Feb 05, 2009 8:08 pm ] |
Post subject: | |
Thanks for the replies guys. I will update this thread if I find anything out. |
Author: | ARBSeth [ Fri Feb 06, 2009 1:37 pm ] |
Post subject: | |
NW Diff in Kirkland Randy's in Everett. |
Author: | hallb4 [ Fri Feb 06, 2009 4:55 pm ] |
Post subject: | |
Nice! Thanks for the tip. |
Author: | CRD Joe [ Thu May 07, 2009 9:07 pm ] |
Post subject: | |
There is a good shop in Bremerton. Bayview 4x4. |
Author: | roccet [ Mon Jul 26, 2010 1:33 am ] |
Post subject: | Re: Gear Shop |
ya well i would pay more just for some qualified folks to do it.. I went into a jeep specialist and i got and i quote "why would you put a locker in a jeep liberty?" I said are you kidding me? have you seen my jeep? .. I laughed and said ill drive 3 hours to portland to get it done but you will never see me again in your shop. |
Author: | jnaut [ Mon Jul 26, 2010 4:55 pm ] |
Post subject: | Re: Gear Shop |
roccet wrote: ya well i would pay more just for some qualified folks to do it.. I went into a jeep specialist and i got and i quote "why would you put a locker in a jeep liberty?" I said are you kidding me? have you seen my jeep? .. I laughed and said ill drive 3 hours to portland to get it done but you will never see me again in your shop. You might try these guys. Honestly, I'm not sure if they're just a supplier of parts, or they'll do the build for you, but I can say that the coolest local liberty I ever saw in the flesh had this shops sticker on it. Good luck. |
Author: | daspes [ Mon Jul 26, 2010 5:32 pm ] |
Post subject: | Re: Gear Shop |
jnaut wrote: You might try these guys. Honestly, I'm not sure if they're just a supplier of parts, or they'll do the build for you, but I can say that the coolest local liberty I ever saw in the flesh had this shops sticker on it. Good luck. After living up there almost 2 years, I never heard of that shop... BTW, Who has the coolest Libby up there now? |
Author: | jnaut [ Mon Jul 26, 2010 8:35 pm ] |
Post subject: | Re: Gear Shop |
daspes wrote: jnaut wrote: You might try these guys. Honestly, I'm not sure if they're just a supplier of parts, or they'll do the build for you, but I can say that the coolest local liberty I ever saw in the flesh had this shops sticker on it. Good luck. After living up there almost 2 years, I never heard of that shop... BTW, Who has the coolest Libby up there now? Pff, I do. Ok, yeah, but seriously, I saw this guy on the Ferry from Vashon Island. There are almost no modded libertys here in Seattle, so it kind of makes for a head turner when I see one. He had custom front and rear bumpers from Tough Country, he was way lifted. I snapped a shot of his rear bumper. I was gonna talk to him but he had people in the car and was on his cell phone. |
Author: | daspes [ Mon Jul 26, 2010 8:54 pm ] |
Post subject: | Re: Gear Shop |
That's a trailready rear bumper. They made one for the front too until last year. |
Author: | arengant [ Mon Jul 26, 2010 11:14 pm ] |
Post subject: | Re: Gear Shop |
Randy's ring and pinion is out of everett, they are a HUGE supplier of gears, and they DO have a shop. Kinda far from where you are. How far are you looking to travel? |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |