LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Meet and Greet/Wrenchfest
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=32&t=63427
Page 1 of 1

Author:  audiboy86 [ Sun Oct 30, 2011 10:49 am ]
Post subject:  Meet and Greet/Wrenchfest

I am going to be host a meet and greet/wrenchfest and am inviting everyone in my area to come and join in. I have a shop with enough floor spaces for 6 to 8 jeeps at a time and air and tools will probably need a few extra jacks. I am in greenwood SC about and hour from Elberton GA.

http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=22&t=63426

Author:  Cobalt-60 [ Fri Nov 11, 2011 12:25 am ]
Post subject:  Re: Meet and Greet/Wrenchfest

Zack, just saw this. I voted for Jan. 28th but I am pretty sure that even by then Bunny will still be out-of-order... but I am interested in seeing the shop and may just jump in the Jetta and come up whenever it is. :-)

EDIT: darn, you are close. 140 miles from Atlanta and Athens (where John is) is half way in between.

Author:  audiboy86 [ Sun Nov 13, 2011 2:57 am ]
Post subject:  Re: Meet and Greet/Wrenchfest

Come on down I am sure there is enough room for the Jetta kinda wondering if it is going to happen turn out so far is looking dismal.

Author:  jhblackwell [ Sun Nov 13, 2011 1:35 pm ]
Post subject:  Re: Meet and Greet/Wrenchfest

I'm up for most anytime, since I'm retired and can do what I want, when I want (when the wife let's me :roll: )
Colin, you could come by here and we could ride together in my KJ. Keep us informed.
John

Author:  Cobalt-60 [ Sun Nov 13, 2011 1:40 pm ]
Post subject:  Re: Meet and Greet/Wrenchfest

jhblackwell wrote:
Colin, you could come by here and we could ride together in my KJ. Keep us informed.


Works for me. :)

Author:  audiboy86 [ Sun Nov 27, 2011 2:19 pm ]
Post subject:  Re: Meet and Greet/Wrenchfest

Bump

Author:  Cobalt-60 [ Mon Dec 26, 2011 8:54 pm ]
Post subject:  Re: Meet and Greet/Wrenchfest

Zack, whatever day you decide on the GA contingent will try to be there. :)

Author:  audiboy86 [ Tue Dec 27, 2011 1:09 pm ]
Post subject:  Re: Meet and Greet/Wrenchfest

It will be decided the 31st of december for you but so far it is looking like the 28th of january.

Author:  audiboy86 [ Fri Dec 30, 2011 3:29 pm ]
Post subject:  Re: Meet and Greet/Wrenchfest

BUMP for Meet & Greet

Author:  audiboy86 [ Sun Jan 08, 2012 12:42 pm ]
Post subject:  Re: Meet and Greet/Wrenchfest

Well everyone voting has finished and the date has been set for the 28th of January. I only have a hand full of jacks and stands so if you have a set please bring them. I will be at the Shop at 9 am so feel free to get there anytime after that also i plan on lunch around 12. I planned on cooking but it isn't in my budget right now since found my front diff seals leakng earlier this month and am waitin on funds to get the 4.10s and master rebuild kits for front and rear. But i will have coolers of drinks and snacks laying around also open coolers for more adult beverages if needed.

Also the address is 563 beaudrot road Greenwood SC 29649 there will be signs at both ends of the road and a sign in the front yard. If you have any issues with finding the place you can also put in Sperry Services in greenwood SC and that will also find it quickly.

A final count would be nice so lets gets a list going

1. Audiboy86

Author:  Cobalt-60 [ Sun Jan 08, 2012 10:50 pm ]
Post subject:  Re: Meet and Greet/Wrenchfest

audiboy86 wrote:
Well everyone voting has finished and the date has been set for the 28th of January. I only have a hand full of jacks and stands so if you have a set please bring them. I will be at the Shop at 9 am so feel free to get there anytime after that also i plan on lunch around 12. I planned on cooking but it isn't in my budget right now since found my front diff seals leakng earlier this month and am waitin on funds to get the 4.10s and master rebuild kits for front and rear. But i will have coolers of drinks and snacks laying around also open coolers for more adult beverages if needed.

Also the address is 563 beaudrot road Greenwood SC 29649 there will be signs at both ends of the road and a sign in the front yard. If you have any issues with finding the place you can also put in Sperry Services in greenwood SC and that will also find it quickly.

A final count would be nice so lets gets a list going


1. Audiboy86
2. Cobolt-60 -- bringing my CVs for you to shave... ;-)

Author:  CoopaTroopa [ Sun Jan 08, 2012 11:28 pm ]
Post subject:  Re: Meet and Greet/Wrenchfest

I'll be there with my lift if you're still down for helping with that!

Author:  audiboy86 [ Mon Jan 09, 2012 7:24 pm ]
Post subject:  Re: Meet and Greet/Wrenchfest

Pm'd you Collin

Author:  jhblackwell [ Mon Jan 09, 2012 11:01 pm ]
Post subject:  Re: Meet and Greet/Wrenchfest

I'll do my best to be there. Colin, as I said before, you can come through here and we'll ride in my KJ. Unfortunately, I just spent $3150 replacing my warped front diff. and both CV axles, and having the heads pulled and re-machined because of the valve seats so I won't be spending anymore money on the Jeep right now....and stay married :roll:

1. Audiboy86
2. Cobolt-60 -- bringing my CVs for you to shave... ;-)
3. jhblackwell--can bring two floor jacks and four jack stands, air tools, etc., if needed.

Author:  audiboy86 [ Sat Jan 14, 2012 11:38 am ]
Post subject:  Re: Meet and Greet/Wrenchfest

Sorry folks was out of town on business for a few days but JH plase bring it all since i only have a few.

Author:  audiboy86 [ Mon Jan 16, 2012 6:38 pm ]
Post subject:  Re: Meet and Greet/Wrenchfest

BUMP

Author:  audiboy86 [ Wed Jan 25, 2012 7:28 pm ]
Post subject:  Re: Meet and Greet/Wrenchfest

Well people I am sorry to do this but we had a major accident at work involving a fork and a major piece of our equipment. So me and all the other mechanics get to work the weekend to repair it and get it running. I will definitely be having it next weekend if everyone is still in.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/