LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Jeep Liberty CRD Mechanical Fan Hub (Rebuilt)
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=34&t=90423
Page 1 of 1

Author:  WWDiesel [ Thu Sep 12, 2019 10:41 pm ]
Post subject:  Jeep Liberty CRD Mechanical Fan Hub (Rebuilt)

Unfortunately like many Jeep CRD parts the replacement Fan Brackets/Hubs are no longer available on any of the Mopar web sites or through dealers; all say "Discontinued" or "No Longer Available". So replacing your fan bracket means scouring the internet or boneyards for a used fan bracket which may or may not be in worse shape than your own.
Or trying to fit an electric fan and do away with the fan bracket totally which involves different drive belt, pulleys, etc... It gets complicated!

There is a much better alternative, replace it with a completely REBUILT Fan Bracket/Hub.
Jeep Liberty CRD Mechanical Fan Hub rebuilt with new slightly larger top quality *Koyo bearings.
This will be done on an exchange basis. I will need your old fan hub (core) so it can be rebuilt for the next person in need.
Purchase will include free shipping in US. (slight shipping up-charge when shipping to Canada)
PM or email if you are in need of a rebuilt fan bracket.
In stock and available for immediate shipping.

*Koyo bearings are the primary bearings used in all Toyota vehicles and are very high quality bearings.

Image

Author:  layback40 [ Fri Sep 13, 2019 8:42 am ]
Post subject:  Re: Jeep Liberty CRD Mechanical Fan Hub (Rebuilt)

Good luck with these!
From what I see you have done an excellent job of rebuilding the hub in a way that appears to be far better than OEM. I dont need one at the moment, but when I do you will hear from me.

Author:  WWDiesel [ Fri Sep 13, 2019 2:09 pm ]
Post subject:  Re: Jeep Liberty CRD Mechanical Fan Hub (Rebuilt)

layback40 wrote:
Good luck with these!
From what I see you have done an excellent job of rebuilding the hub in a way that appears to be far better than OEM. I dont need one at the moment, but when I do you will hear from me.

Thanks, still hoping to source some OEM type bearings, but until then and if that even happens at all, this is the only option other than eliminating the mechanical fan all together and installing a less efficient electric fan. But that gets into adding an idler pulley or shorter belt, etc...
I hope you have success down under in locating a source for the OEM bearings... :POPCORN:

Author:  WWDiesel [ Thu Oct 03, 2019 9:21 pm ]
Post subject:  Re: Jeep Liberty CRD Mechanical Fan Hub (Rebuilt)

Anyone have a fan bracket rebuildable core (bad bearing etc...) they no longer want, I am interested in obtaining them for rebuilding purposes.
Will gladly pay or reimburse postage from anywhere in US.
PM or eMail me.
Thanks,

Author:  WWDiesel [ Wed Oct 16, 2019 10:34 pm ]
Post subject:  Re: Jeep Liberty CRD Mechanical Fan Hub (Rebuilt)

Finished rebuilding another CRD fan hub today.
Thanks to Nick in Canada for sending me his core.

This one is now available if you need one....
PM or email.

Image

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/