LOST JEEPS :: View topic - Is JBA's website correct?

I just checked over at JBA's website and searched for products for my Lib ('04 V6 gas). Their application chart said that their headers WOULD fit my year! But, from what I've seen here on the forum, their headers do NOT fit anything older than '05.

So, what's the deal? Do JBA's fit an '04, or is there some kind of issue with fitting/leaking? Any help would be greatly appreciated!

Ive got to see your liberty in person someday KY. Get a lift on that thing and bring it to livingston. :twisted:

No one wants to modify the connections to the cats because they're afraid of getting a $2500 fine for each one. Removing the cats gets they same fines. I haven't been able to find anyone around here that will go near them until the cats have 8 years, or 80k miles on them because of the laws.

anyone got a pic of the "Y-Pipe" that is causing the problem? How much is involved chanign em out?

i.e. Woould I be able to steal the pipe from my wife's 06 to use on my '02?

This is killing me. I'm really patient, but I've been trying to get headers on the KJ for over 6 years. I've even owned some for almost a year now. I need them for the cams upgrade. That's why I'm going ahead and lifting it, and doing the rest of the body work. I ordered the lift and a-arms today. At least I'll get the performance back in 15k miles when I can do the motor build that I actually want.

KY Liberty,
Do you mean it is illegal to change the Y-Pipe in the US? :shock:

If it is NOT, I can send you one from here and it will cost you less than $200. :wink:

BTW, it is Stainless Steal, and you will get a 5 years warranty also.

Author:	kjblack04 [ Sun Aug 26, 2007 8:51 pm ]
Post subject:	Is JBA's website correct?
I just checked over at JBA's website and searched for products for my Lib ('04 V6 gas). Their application chart said that their headers WOULD fit my year! But, from what I've seen here on the forum, their headers do NOT fit anything older than '05. So, what's the deal? Do JBA's fit an '04, or is there some kind of issue with fitting/leaking? Any help would be greatly appreciated!

Author:	tjkj2002 [ Sun Aug 26, 2007 8:56 pm ]
Post subject:	Re: Is JBA's website correct?
kjblack04 wrote: I just checked over at JBA's website and searched for products for my Lib ('04 V6 gas). Their application chart said that their headers WOULD fit my year! But, from what I've seen here on the forum, their headers do NOT fit anything older than '05. So, what's the deal? Do JBA's fit an '04, or is there some kind of issue with fitting/leaking? Any help would be greatly appreciated! Nope only fit's '05+ with the different Y-pipe connectors,you could get the different Y-pipe,the cheapest(even on the online discount wholesalers) I've found the newer Y-pipe going for is $1200 ,guess no headers for me when it's time for the SFA swap ,just got to shoe horn that 4.7 in instaed .

Author:	kjblack04 [ Sun Aug 26, 2007 9:01 pm ]
Post subject:
Well crap. Thanx again for the reply man, you're really on top of these questions tonight!

Author:	KY Liberty [ Sun Aug 26, 2007 11:45 pm ]
Post subject:
I've got a set of them sitting in a box. No one will even look at installing them for me around here until it hits 80k miles or 8 years. Only a little over 65k miles and 6 years right now. They will not bolt on for the '02-'04.

Author:	SS-Virus [ Tue Aug 28, 2007 3:20 am ]
Post subject:
I have 03 Liberty, and I already installed the JBA's headers on it. They just manufacture a new Y-Pipe, it cost me only SAR, 500.00 which is $135 Only. I don't know what is the problem in US Liberty, as I am from Middle East.

LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/

Is JBA's website correct? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=4&t=23791	Page 1 of 1

Author:	KY Liberty [ Tue Aug 28, 2007 8:06 am ]
Post subject:
No one wants to modify the connections to the cats because they're afraid of getting a $2500 fine for each one. Removing the cats gets they same fines. I haven't been able to find anyone around here that will go near them until the cats have 8 years, or 80k miles on them because of the laws.

Author:	Jeepjeepster [ Tue Aug 28, 2007 7:04 pm ]
Post subject:
Ive got to see your liberty in person someday KY. Get a lift on that thing and bring it to livingston.

Author:	KY Liberty [ Tue Aug 28, 2007 7:53 pm ]
Post subject:
Jeepjeepster wrote: Ive got to see your liberty in person someday KY. Get a lift on that thing and bring it to livingston. Funny you should mention that. I spent some time talking to RL today. I'm going to order a Frankenlift II Premium before the weekend. I'm going to get the front bumper when they're ready. Was just about to post in the 4X4 section and get some input on tires and rims, trimming, etc...

Author:	Neatus [ Wed Aug 29, 2007 12:14 am ]
Post subject:
Haha, KY is finally coming to the dark side...errr, you were just on a different dark side...now you will be on both darks sides...ummm, yeah so I will stop talking now but congrats on the lift and other cool stuff:)

Author:	Pablo [ Wed Aug 29, 2007 2:18 am ]
Post subject:
KY Liberty wrote: No one wants to modify the connections to the cats because they're afraid of getting a $2500 fine for each one. Removing the cats gets they same fines. I haven't been able to find anyone around here that will go near them until the cats have 8 years, or 80k miles on them because of the laws. You know if you go wheelin and perhaps get the cat hung on a rock, then I guess you may have have to replace it sooner.

Author:	Gris [ Wed Aug 29, 2007 9:01 am ]
Post subject:
anyone got a pic of the "Y-Pipe" that is causing the problem? How much is involved chanign em out? i.e. Woould I be able to steal the pipe from my wife's 06 to use on my '02?

Author:	tjkj2002 [ Wed Aug 29, 2007 12:37 pm ]
Post subject:
Gris wrote: anyone got a pic of the "Y-Pipe" that is causing the problem? How much is involved chanign em out? i.e. Woould I be able to steal the pipe from my wife's 06 to use on my '02? I don't have a pic but the reason is they changed how the Y-pipe connects to the OEM manifolds in '05.The '02-'04's use a band clamp(like a hose clamp) style ends and the '05+'s use a bolt on style.The cheapest I've found the Y-pipe for yet is just under $1200,Chysler is pretty proud of those cats .

Author:	KY Liberty [ Wed Aug 29, 2007 7:46 pm ]
Post subject:
This is killing me. I'm really patient, but I've been trying to get headers on the KJ for over 6 years. I've even owned some for almost a year now. I need them for the cams upgrade. That's why I'm going ahead and lifting it, and doing the rest of the body work. I ordered the lift and a-arms today. At least I'll get the performance back in 15k miles when I can do the motor build that I actually want.

Author:	Neatus [ Thu Aug 30, 2007 10:58 am ]
Post subject:
KY Liberty wrote: This is killing me. I'm really patient, but I've been trying to get headers on the KJ for over 6 years. I've even owned some for almost a year now. I need them for the cams upgrade. That's why I'm going ahead and lifting it, and doing the rest of the body work. I ordered the lift and a-arms today. At least I'll get the performance back in 15k miles when I can do the motor build that I actually want. You can have my odometer out of my 03! It says 109,000k....good luck man.

Page 1 of 1	All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/

Author:	SS-Virus [ Sat Sep 01, 2007 5:19 am ]
Post subject:
KY Liberty, Do you mean it is illegal to change the Y-Pipe in the US? If it is NOT, I can send you one from here and it will cost you less than $200. BTW, it is Stainless Steal, and you will get a 5 years warranty also.

Author:	KY Liberty [ Sat Sep 01, 2007 10:24 am ]
Post subject:
SS-Virus wrote: KY Liberty, Do you mean it is illegal to change the Y-Pipe in the US? If it is NOT, I can send you one from here and it will cost you less than $200. BTW, it is Stainless Steal, and you will get a 5 years warranty also. I'll need to talk to the mechanics to see if they can replace the Y-Pipe without problems. That sounds like a possible solution though.