Hi everybody,
recentlly i saw the liberty of my dreams, this is the url:http://www.flickr.com/photos/cshontz/31364026/sizes/l/in/set-699975/

Well, i have a question: Does anybody knows what wheels have this machine and what kind of suspension do i need to use them?

and

can i use those wheels whith the suspention that came with the liberty?

Thanks a lot.
Donkan

_________________
DonkanKJ

Fixed the link for you.

That is the 2004 Liberator concept vehicle. The rims are factory Moabs (from the 04-06 Rubicon's) that have been bead locked. The suspension is a Skunkwerks one off I believe, along with a custom front diff allowed them to go that high.

More info here. http://www.4wdandsportutility.com/features/jeep/0610_4wd_2004_jeep_liberty_concept/index.html

_________________
- Mike
'12 JK

Jeep Tech Files

Oh, by the way, Welcome to the Board! Introduce yourself in the new members section. The factory Moabs can be used on your KJ. Some omoney to get them beadlocked though.

_________________
- Mike
'12 JK

Jeep Tech Files

That is the Liberator concept.It has a prototype 4" Superlift knuckle lift,don't hold your breath for it they scraped the idea.The rims are one-off rims to simulate beadlocks on TJ MOAB rims.The tires are 35",and a WK front diff was modified to fit up front to handle those 35's.Jeep had a unlimited budget for that KJ and no parts of it are available,all prototypes.You would need to do a SFA swap to get 35" tires under a KJ,the current KJ front diff will not handle over 32" tires and live.

So in short those rims and lift are not available.

thanks so much!

I'will find some of those parts here in Chile, for my Cherokee ...

.. because, outside the USA Liberty is soled as Cherokee, for ... commercial reasons?

------------------------------------------------
... you know, only in a Jeep

_________________
DonkanKJ

Outside the US the KJ is not called a Liberty from another automaker already has a Liberty on the market that is not sold in the US.

Good luck finding one-off parts on a prototype going to the crusher unless you fab the stuff yourself.

I like that front bumper. Anyone know here that could make one?

_________________
My Rig:
2008 Jeep Wrangler JKU
OME HD lift
35" tires (thus far)
plus a ton of other things. J.E.E.P.

Also, the rear axle was moved to accomodate the tire size in the rear.

_________________
2003 Liberty Sport 4X4
DIY Frankie Lift, BBS Rims, Aussie Locker Rear, DTT Front, Renegade Rack & Light Bar, Custom Front Bumper w/ Warn XD9000i, Custom Rear Bumper, JBA UCA's, Full Skids(Mopar, Kilby and Super skid), CRS Rock Rails, CB, EVIC, Nav, power dim mirror, (2) 8" subs under front seats. http://www.cardomain.com/ride/2512777