| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Hemi. http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=4&t=41588 |
Page 1 of 1 |
| Author: | jesseb797 [ Thu Mar 26, 2009 5:18 pm ] |
| Post subject: | Hemi. |
Hey guys I emailed Burnsville Offroad, the company you all know for swapping hemis into wranglers, and they said that it is possible to put the hemi in the kj with a straight axle conversion and about six inches of lift. So whose all up for donations so I can do it 
|
|
| Author: | JMSMN [ Thu Mar 26, 2009 9:19 pm ] |
| Post subject: | |
After the SFA, how much did they day that the hemi would cost and what size engine it would be. |
|
| Author: | SS-Virus [ Sat Mar 28, 2009 10:51 am ] |
| Post subject: | |
The price for that is $35,000.00. A front straight axle conversion needs to be done. That would be the cost for a 5.7 litre hemi. The larger hemi motors could be done as well. Dan Burnsville Offroad |
|
| Author: | KJ kyle [ Sat Mar 28, 2009 4:27 pm ] |
| Post subject: | |
how about a 4.7 swap? Im not too big on the hemi's now adays considering theyre not even real hemi's anymore... just chrysler using the name. 
|
|
| Author: | lil black liberty [ Sat Mar 28, 2009 5:59 pm ] |
| Post subject: | |
I know I miss the old Hemi's of the 60's/70's... |
|
| Author: | tjkoen01 [ Sat Mar 28, 2009 7:33 pm ] |
| Post subject: | |
KJ kyle wrote: how about a 4.7 swap? Im not too big on the hemi's now adays considering theyre not even real hemi's anymore... just chrysler using the name.
how are they not hemi's? |
|
| Author: | JMSMN [ Sat Mar 28, 2009 8:03 pm ] |
| Post subject: | |
Do they not have they hemispherical head for the combustion chamber anymore? |
|
| Author: | tjkj2002 [ Sat Mar 28, 2009 8:27 pm ] |
| Post subject: | |
JMSMN wrote: Do they not have they hemispherical head for the combustion chamber anymore? Yes they are HEMI's,even with the hemispherical heads and 2 plugs per cylinder.
|
|
| Author: | ATXKJ [ Sat Mar 28, 2009 11:36 pm ] |
| Post subject: | |
lil black liberty wrote: I know I miss the old Hemi's of the 60's/70's...
Here you are 426 Hemi http://www.jegs.com/p/Mopar+Performance/752914/10002/-1 472 Hemi http://www.jegs.com/p/Mopar+Performance/761966/10002/-1 or you can scale them down to the 5.7 http://www.jegs.com/p/Mopar+Performance/761289/10002/-1 |
|
| Author: | tjkj2002 [ Sat Mar 28, 2009 11:42 pm ] |
| Post subject: | |
Though if your going to put a HEMI in it might as well get the biggest and baddest one..................... The 572cu in all aluminum HEMI 
|
|
| Author: | Diggerfreek [ Sat Mar 28, 2009 11:47 pm ] |
| Post subject: | |
tjkj2002 wrote: Though if your going to put a HEMI in it might as well get the biggest and baddest one.....................
The 572cu in all aluminum HEMI 
well there goes my license
|
|
| Author: | lil black liberty [ Sun Mar 29, 2009 10:53 am ] |
| Post subject: | |
God...Wouldn't that be one hell of a vehicle... I can hear it now.. Yeah my KJ goes 0-60 in 13 seconds, Yeah Well My KJ goes 0-60 in 4 seconds hah! That's one bad puppy there..
Also: The current-production "HEMI" engine does not employ truly hemispherical combustion chambers; they are flatter and more complex than the 1950s–'70s Hemi V8 chamber. It uses a coil-on-plug distributorless ignition system and two spark plugs per cylinder to shorten flame travel leading to more consistent combustion which helps reduce emissions. |
|
| Author: | Jeepjeepster [ Thu Apr 02, 2009 11:07 pm ] |
| Post subject: | |
Far as I know its a hemi.. The 4.7 is 'almost' a hemi from what Ive read. Not sure if that means the 3.7 has the same shape heads as the 4.7.. |
|
| Author: | KJ kyle [ Thu Apr 02, 2009 11:18 pm ] |
| Post subject: | |
Quote: how about a 4.7 swap? Im not too big on the hemi's now adays considering theyre not even real hemi's anymore... just chrysler using the name.
the reason i said that is i have heard the combustion chamber is not hemishpherical. apperently they just use the name. |
|
| Author: | tjkoen01 [ Fri Apr 03, 2009 5:22 am ] |
| Post subject: | |
Jeepjeepster wrote: Far as I know its a hemi..
The 4.7 is 'almost' a hemi from what Ive read. Not sure if that means the 3.7 has the same shape heads as the 4.7.. yes, the 4.7 and 3.7 are semi hemi's...as for the 5.7 and 6.1's: "The engine's unique two-valve hemispherical combustion chamber within an aluminum head provides impressive air flow, torque and power (hallmarks of the original), and gives the engine its throaty rumble."- from allpar.com http://www.allpar.com/mopar/new-mopar-hemi.html IT'S A HEMI! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|