I am having a hell of a time removing the front turn signal. I removed the plastic housing, but i can't get it disconnected. I tried turing it and pulling and just pulling it and many other unsuccessful maneuvers. If someone can explain how to properly remove it, it would be a huge help. I am trying to remove it so I can fix part of the seal that has came off and let moisture in. Thanks for the help. It is a 2006 Jeep Liberty Limited.

It should be a little tab that holds the connector into the socket on the light plug. If so, just use a small flat head and gently push it down as you pull it out. It has a little catch on it to keep it in place.

Did you get the seal fixed?

Yep. Put in back in yesterday. Let it cure for about 24 hours. Still no moisture.

Good. It was nice talking to ya and glad I could help.