| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Need Help with removing turn signal http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=4&t=49944 |
Page 1 of 1 |
| Author: | giordanom2 [ Fri Feb 05, 2010 8:57 pm ] |
| Post subject: | Need Help with removing turn signal |
I am having a hell of a time removing the front turn signal. I removed the plastic housing, but i can't get it disconnected. I tried turing it and pulling and just pulling it and many other unsuccessful maneuvers. If someone can explain how to properly remove it, it would be a huge help. I am trying to remove it so I can fix part of the seal that has came off and let moisture in. Thanks for the help. It is a 2006 Jeep Liberty Limited.  
|
|
| Author: | TexasRock [ Sat Feb 06, 2010 12:28 pm ] |
| Post subject: | Re: Need Help with removing turn signal |
It should be a little tab that holds the connector into the socket on the light plug. If so, just use a small flat head and gently push it down as you pull it out. It has a little catch on it to keep it in place. |
|
| Author: | TexasRock [ Sun Feb 07, 2010 1:51 pm ] |
| Post subject: | Re: Need Help with removing turn signal |
Did you get the seal fixed? |
|
| Author: | giordanom2 [ Mon Feb 08, 2010 10:45 pm ] |
| Post subject: | Re: Need Help with removing turn signal |
Yep. Put in back in yesterday. Let it cure for about 24 hours. Still no moisture. |
|
| Author: | TexasRock [ Tue Feb 09, 2010 12:33 pm ] |
| Post subject: | Re: Need Help with removing turn signal |
Good. It was nice talking to ya and glad I could help. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|