like a different vehicle man
it almost made me want to start dropping weight.. then I got over it and started adding more
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Programming a Second PCM http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=4&t=58368 |
Page 1 of 1 |
| Author: | long_tall_texan [ Wed Jan 19, 2011 8:15 pm ] |
| Post subject: | Programming a Second PCM |
So, If I was to get a PCM flash by B&G, I would want to get a second PCM like a lot of others have done. Will a PCM from any year KJ work? Or do I have to get another PCM for a 2007 KJ? Will a PCM from a KK work? |
|
| Author: | ATXKJ [ Wed Jan 19, 2011 8:56 pm ] |
| Post subject: | Re: Programming a Second PCM |
on the CRD's either year will work - but it must be coded for your engine... (talk to the GDE guys - they'll probably know what the gassers need too) |
|
| Author: | JeepinJarhead03 [ Wed Jan 19, 2011 10:03 pm ] |
| Post subject: | Re: Programming a Second PCM |
the ODO's gotta match too btw otherwise it'll crank and shut right off to reuse the stock module it would have to be reprog'ed for the new "current" odo reading to work, it's one of the reasons they usually ask you to send in your actual module, as many have difficulty locating a tech willing to prog the odo |
|
| Author: | tjkj2002 [ Wed Jan 19, 2011 11:51 pm ] |
| Post subject: | Re: Programming a Second PCM |
long_tall_texan wrote: So, If I was to get a PCM flash by B&G, I would want to get a second PCM like a lot of others have done. Will a PCM from any year KJ work? Or do I have to get another PCM for a 2007 KJ? Will a PCM from a KK work? '07's are a oddball and you will need a '07 PCM.Programming the mileage is a whole nother topic which a dealership can not even do,they must send it out the a authorized place to have that done and maybe a touchy issue unless you give them a core back otherwise they will most likely not do it. Just send your current PCM out and find another ride for a few days,the best way,the cheapest,and most legal. |
|
| Author: | long_tall_texan [ Wed Jan 19, 2011 11:56 pm ] |
| Post subject: | Re: Programming a Second PCM |
Thanks TJ. I thought my 07 was the red-headed step child, and was year specific. So next question. For those of you that have done the tune. Is it really worth it? |
|
| Author: | JeepinJarhead03 [ Thu Jan 20, 2011 1:15 am ] |
| Post subject: | Re: Programming a Second PCM |
like a different vehicle man it almost made me want to start dropping weight.. then I got over it and started adding more
|
|
| Author: | KJWildman [ Fri Jan 21, 2011 8:20 pm ] |
| Post subject: | Re: Programming a Second PCM |
I have the old PCM out of mine ('02) if someone needs to buy another one!  in fact all the boxes from under the hood are available! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|