| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| LTT possible intake request. http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=4&t=61982 |
Page 1 of 1 |
| Author: | liquidxit2 [ Tue Aug 09, 2011 11:47 am ] |
| Post subject: | LTT possible intake request. |
Well I have been thinking about messing around with the intake system yet again and I thought LTT could possibly help. Putting an amsoil filter in the stock box and replace the intake tube with a smooth (non accordian) larger abs tube. I spit balled this a while back but decided to go with the k and n for the larger tube and velocity stack. But I figure this would be a cheaper alternative to other aftermarket and provide similar results with the added benefit of being better against water and dust. Just an idea... |
|
| Author: | liquidxit2 [ Tue Aug 09, 2011 1:09 pm ] |
| Post subject: | Re: LTT possible intake request. |
Would have to have a semi flexible coupler on each end for flexing under acceleration. |
|
| Author: | bunkermonkeycw [ Tue Aug 09, 2011 1:50 pm ] |
| Post subject: | Re: LTT possible intake request. |
When your done designing Ill come down DC way and let you help me implement the same... Howard is around the beltway, right? |
|
| Author: | long_tall_texan [ Tue Aug 09, 2011 3:28 pm ] |
| Post subject: | Re: LTT possible intake request. |
I have looked at that before. Problem is, my 3-D printer build envelope is not large enough to make a tube that long. |
|
| Author: | liquidxit2 [ Tue Aug 09, 2011 8:51 pm ] |
| Post subject: | Re: LTT possible intake request. |
We are 20min north of 495. long_tall_texan wrote: I have looked at that before. Problem is, my 3-D printer build envelope is not large enough to make a tube that long. How about a 2 piece? Either way was a nice thought. |
|
| Author: | long_tall_texan [ Wed Aug 10, 2011 10:55 am ] |
| Post subject: | Re: LTT possible intake request. |
I'll take another look and see.. |
|
| Author: | bunkermonkeycw [ Wed Aug 10, 2011 3:44 pm ] |
| Post subject: | Re: LTT possible intake request. |
liquidxit2 wrote: We are 20min north of 495. long_tall_texan wrote: I have looked at that before. Problem is, my 3-D printer build envelope is not large enough to make a tube that long. How about a 2 piece? Either way was a nice thought. Nice, I got friends in the DMV area, Ill have to look yah up when I'm down there. Any other LOST KJs down there? |
|
| Author: | liquidxit2 [ Wed Aug 10, 2011 6:13 pm ] |
| Post subject: | Re: Re: LTT possible intake request. |
bunkermonkeycw wrote: liquidxit2 wrote: We are 20min north of 495. long_tall_texan wrote: I have looked at that before. Problem is, my 3-D printer build envelope is not large enough to make a tube that long. How about a 2 piece? Either way was a nice thought. Nice, I got friends in the DMV area, Ill have to look yah up when I'm down there. Any other LOST KJs down there? I have seen 2 lifted KJs in the area. One on 95 so could just be passing through and one in columbia twice, but havent seen it in years. Other then that mine is the only one. Sent from my PG06100 using Tapatalk |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|