On the ones I have made the hole is same size as the hose and its just a tight fit in there, nothing "holds" it in, just about an inch of the end back into the box

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

im using this

Made by Spectre. Can be ordered online or found at your local store in the r1cer section

I used black RTV silicone. The next time, I would use two threaded couplings so that it can be removed or adjusted.

_________________
I had:
'06 Black Renegade
Mopar Skids, Renegade Roof Lights, Mopar Crossbars
Custom made intake, Custom made rear shelf
http://profile.imageshack.us/user/monsieurglen/