LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
Jba headers on 02 http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=4&t=80693 |
Page 1 of 1 |
Author: | linkfalcon [ Thu Nov 20, 2014 5:29 pm ] |
Post subject: | Jba headers on 02 |
Anyone installed jba headers on there 3.7 02 libberty Sent from my iPhone using Tapatalk |
Author: | JeepMorrison [ Thu Nov 20, 2014 8:20 pm ] |
Post subject: | Re: Jba headers on 02 |
Do you have a set? |
Author: | tjkj2002 [ Thu Nov 20, 2014 8:46 pm ] |
Post subject: | Re: Jba headers on 02 |
USAFCOP has them on his '02 but with the SFA eitherway it required custom exhaust work and the bolts never would stay tight no matter what was done. |
Author: | linkfalcon [ Fri Nov 21, 2014 6:40 pm ] |
Post subject: | Re: Jba headers on 02 |
What bolts the header or v clamp bolts Sent from my iPhone using Tapatalk |
Author: | jeeptorino68 [ Sun Nov 23, 2014 1:22 am ] |
Post subject: | Re: Jba headers on 02 |
had a set of JBA stainless, but the early years use a clamp (02 and 03s i think) vs the later years that have a conventional flange bolt pattern, so i never put them on mine. but you would either have to convert to the conventional flange, or find headers for the clamp connection... |
Author: | linkfalcon [ Sun Nov 23, 2014 9:06 am ] |
Post subject: | Re: Jba headers on 02 |
darn good point just saw that Sent from my iPhone using Tapatalk |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |