It is currently Sun Dec 09, 2018 11:14 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: 2006 Liberty will not shift into park.
PostPosted: Sun Sep 13, 2015 6:16 pm 
Offline
LOST Newbie

Joined: Sun Sep 13, 2015 5:45 pm
Posts: 2
2006 Liberty. I wanted to move it forward about a foot on my driveway. I turned key to on position but did not start the engine. With my foot on the brake, I moved shift lever from Park to Neutral. Took my foot off the brake and vehicle moved forward about a foot on my sloping driveway. I pressed the brake and it stopped. When I attempted to move shift lever back to Park, it would not go past the Reverse position. Will operate in all positions except Park. The only thing it will not do is move into Park. Now when I a to the end of a trip, I just move into Neutral and set the Hand Brake. Any thoughts on how to get into Park?

johncrick


Top
 Profile  
 
 Post subject: Re: 2006 Liberty will not shift into park.
PostPosted: Sun Sep 27, 2015 1:16 am 
Offline
LOST Member

Joined: Thu Feb 18, 2010 12:12 am
Posts: 126
Location: Alaska
Maybe the interlock cable between the gearshift lever and the key. You can disconnect it by removing the steering column cover,(2 torx screws). Look underneath on the right side and you should see the cable. Release clip is hidden on top... then slide toward front of jeep to remove end from ignition switch. If that doesn't allow the shift lever into park then the damage is on the other end of the cable under the console.

Hope that helps.


Top
 Profile  
 
 Post subject: Re: 2006 Liberty will not shift into park.
PostPosted: Wed May 24, 2017 3:48 pm 
Offline
LOST Newbie

Joined: Sun Sep 13, 2015 5:45 pm
Posts: 2
Quote:
turblediesel wrote:
Maybe the interlock cable between the gearshift lever and the key. You can disconnect it by removing the steering column cover,(2 torx screws). Look underneath on the right side and you should see the cable. Release clip is hidden on top... then slide toward front of jeep to remove end from ignition switch. If that doesn't allow the shift lever into park then the damage is on the other end of the cable under the console.

Hope that helps.


Thank you for the reply.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com