The tailpipe was starting to rot off the muffler around black friday. I ordered the Walker 54441 pipe. When it showed up, I was a little disappointed that every bend was rippled like the bellows of an accordian - reducing the diameter (and flow) over the mandrel-bent original. I thought fine... I can put up with that.
Yesterday I pull out the old tailpipe and realized the walker is also a smaller diameter pipe to start with 2¼" vs 2½". Now I think I'm just going to try and patch the old one back on and return the Walker.
Anyone found a jobber tailpipe that's not a downgrade?
_________________ Hers: 2005 KJ, V6/6spd/NV242J/3.73/posi, 2" Teraflex, ¾" cradle drop, KK forks, 22½" hub-to-flare, RRO arms, 245/75R16s, 260,000km Mine: 1993 W250, Cummins/5spd/NP205/3.54, Lockright, ~3" lift, 315/75R16 Duratracs, extra smoke, more noise, 374,000km
|