LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Aftermarket/jobber tailpipe in 2.5"? or OEM only?
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=4&t=89636		 Page 1 of 1
Author:  u2slow [ Sat Jan 19, 2019 2:13 pm ]
Post subject:  Aftermarket/jobber tailpipe in 2.5"? or OEM only?
The tailpipe was starting to rot off the muffler around black friday. I ordered the Walker 54441 pipe. When it showed up, I was a little disappointed that every bend was rippled like the bellows of an accordian - reducing the diameter (and flow) over the mandrel-bent original. I thought fine... I can put up with that.

Yesterday I pull out the old tailpipe and realized the walker is also a smaller diameter pipe to start with 2¼" vs 2½". Now I think I'm just going to try and patch the old one back on and return the Walker.

Anyone found a jobber tailpipe that's not a downgrade?
Author:  tommudd [ Sun Jan 20, 2019 12:20 am ]
Post subject:  Re: Aftermarket/jobber tailpipe in 2.5"? or OEM only?
try walker
Author:  WWDiesel [ Sun Jan 20, 2019 11:46 am ]
Post subject:  Re: Aftermarket/jobber tailpipe in 2.5"? or OEM only?
Find a good muffler shop who bend their own exhaust tubing from straight stock and let them build your pipes.
2.5 in and No ripples.... :D
Author:  u2slow [ Mon Jan 21, 2019 2:39 pm ]
Post subject:  Re: Aftermarket/jobber tailpipe in 2.5"? or OEM only?
It is the Walker... #54441

Image

No muffler shops on this island. I order in, or build my own. I see there's a Dynomax performance pipe now.... # 54288
Author:  WWDiesel [ Mon Jan 21, 2019 11:19 pm ]
Post subject:  Re: Aftermarket/jobber tailpipe in 2.5"? or OEM only?
Well the Dynomax 54288 sure looks better than that other cheap looking mess....

Image
Author:  u2slow [ Tue Jan 22, 2019 9:42 pm ]
Post subject:  Re: Aftermarket/jobber tailpipe in 2.5"? or OEM only?
^ Agreed.

Will be looking for that one when my OE pipe is used up.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/